Hi Uzair,

Your memory system needs to implement the same semantics as the gem5 memory 
system (not just read and write). Have a look at SimpleMemory in src/mem for 
what you need to do. Depending on how you bridge to SystemC, you need to also 
translate from TLM to gem5 packets, also for these more complex memory commands.

Andreas

From: gem5-users 
<[email protected]<mailto:[email protected]>> on behalf of 
Uzair Sharif <[email protected]<mailto:[email protected]>>
Reply-To: gem5 users mailing list 
<[email protected]<mailto:[email protected]>>
Date: Wednesday, 25 November 2015 at 14:47
To: gem5 <[email protected]<mailto:[email protected]>>
Subject: Re: [gem5-users] SystemC coupling with gem5

Hi,

I forgot to mention that in this simple.py setup even with membus hooked to 
external world (like in util/tlm/tlm.py) I get the same assertion error so this 
issue is atleast not related to directly hooking CPU to SystemC.

Regards, uzair

________________________________
From: [email protected]<mailto:[email protected]>
To: [email protected]<mailto:[email protected]>
Date: Wed, 25 Nov 2015 15:19:42 +0100
Subject: Re: [gem5-users] SystemC coupling with gem5

Hi,

Thanks guys for the feedback. Well sofar I modified 
/configs/learning_gem5/part1/simple.py system to hook up single CPU's cache 
ports (i/d) as well as system_port to 3 ExternalSlave ports with membus 
disabled. From the logs I can see that binary for hello_world is loaded 
followed by a block of memory written via dcache_port. After that the 
simulation starts running with IFetches and it seems to work fine but I end up 
with an assertion failure:

0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000

0 s (=) : sc_main Port Found

0 s (=) : /IEEE_Std_1666/deprecated deprecated constructor: sc_time(uint64,bool)

gem5.opt.sc: build/ARM/mem/request.hh:569: uint64_t Request::getExtraData() 
const: Assertion `privateFlags.isSet(VALID_EXTRA_DATA)'
failed.

Program aborted at tick 80160000

Aborted (core dumped)

Can you guys point out why this assertion fails as I am not familiar with gem5 
internals?? Is it related to the use of external memory system?? Have I messed 
up somewhere??


Regarding the use of SystemC memory system, actually I have already developed 
SystemC models and used them in ARMv7 based architectures but now I want to 
integrate them with ARMv8 based mutlicore systems which I think are supported 
well by gem5. I can use the system.membus-hook-to-SystemC approach but I need 
to somehow figure out which smp-core actually initiated the memory transaction 
for my cache-algos to work. Is this possible within gem5 that somehow I can 
know initiator-smp core via some sort of tlm_extension or something else within 
the SystemC port/target?? This would be quite useful and allow me to just hook 
the membus which is already done by Matthias work

Regards, uzair


________________________________
From: [email protected]<mailto:[email protected]>
To: [email protected]<mailto:[email protected]>
Date: Wed, 25 Nov 2015 13:37:26 +0000
Subject: Re: [gem5-users] SystemC coupling with gem5

Hi Uzair,

I think conceptually you should be find doing what you suggest: Connect each 
CPU core directly to two ExternalSlave ports

As Abdul points out though…this is really jumping in at the deep end.

Andreas

From: gem5-users 
<[email protected]<mailto:[email protected]>> on behalf of 
Abdul Mutaal <[email protected]<mailto:[email protected]>>
Reply-To: gem5 users mailing list 
<[email protected]<mailto:[email protected]>>
Date: Wednesday, 25 November 2015 at 13:34
To: gem5 users mailing list <[email protected]<mailto:[email protected]>>
Subject: Re: [gem5-users] SystemC coupling with gem5

Hi,

I believe it would be tough to realize a system in gem5 without system bus. It 
would suggest you to keep the membus and play with its parameters so that it 
doesn't effect your simulation (latency or bandwidth).

I haven't tried but you can also look to run in SE mode. FS seems to be too 
complex for your architecture.

Regards,

Abdul Mutaal

2015-11-25 11:43 GMT+01:00 Uzair Sharif 
<[email protected]<mailto:[email protected]>>:

Hi,


Is it possible that I can hook CPU model within full system to SystemC?? I have 
gone through util/tlm example but that hooks the mem_bus to SystemC module.

Can I just simply disable all caches, membus, mem_ctrls and connect CPU's 
icache_port, dcache_port to ExternalSlave (like in the TLM example) and 
implement the entire memory system functionality in SystemC?? What should I be 
careful about in doing this??


Regards,

uzair

_______________________________________________
gem5-users mailing list
[email protected]<mailto:[email protected]>
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users



--

Regards,
Abdul Mutaal


IMPORTANT NOTICE: The contents of this email and any attachments are 
confidential and may also be privileged. If you are not the intended recipient, 
please notify the sender immediately and do not disclose the contents to any 
other person, use it for any purpose, or store or copy the information in any 
medium. Thank you.
_______________________________________________ gem5-users mailing list 
[email protected]<mailto:[email protected]> 
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

_______________________________________________ gem5-users mailing list 
[email protected]<mailto:[email protected]> 
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
IMPORTANT NOTICE: The contents of this email and any attachments are 
confidential and may also be privileged. If you are not the intended recipient, 
please notify the sender immediately and do not disclose the contents to any 
other person, use it for any purpose, or store or copy the information in any 
medium. Thank you.
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to