Hi Mahmood, The old ICS bbench setup with the VNCviewer is no longer maintained (for quite some time).
Andreas From: gem5-users <[email protected]<mailto:[email protected]>> on behalf of Mahmood Naderan <[email protected]<mailto:[email protected]>> Reply-To: gem5 users mailing list <[email protected]<mailto:[email protected]>> Date: Monday, 28 December 2015 at 16:08 To: gem5 users mailing list <[email protected]<mailto:[email protected]>> Subject: Re: [gem5-users] Error on gem5.debug but no error on gem5.fast OK it seems I have to setup that. I thought the ICS bbench is a good place for tests. Lets move on then... Regards, Mahmood On Mon, Dec 28, 2015 at 7:28 PM, Andreas Hansson <[email protected]<mailto:[email protected]>> wrote: Hi, gem5.fast does not have any assertions. As I already mentioned, I’d suggest to forget all about ICS and instead follow the instructions here: http://www.gem5.org/Android_KitKat and here: http://www.gem5.org/WA-gem5. That enables you to run a wide range of workloads, using Workload Automation on Android KitKat. Andreas From: gem5-users <[email protected]<mailto:[email protected]>> on behalf of Mahmood Naderan <[email protected]<mailto:[email protected]>> Reply-To: gem5 users mailing list <[email protected]<mailto:[email protected]>> Date: Monday, 28 December 2015 at 08:43 To: gem5 users mailing list <[email protected]<mailto:[email protected]>> Subject: [gem5-users] Error on gem5.debug but no error on gem5.fast Hi, If I run bbench with gem5.debug, I immediately get an error in the code however, gem5.fast doesn't fail at that point. In fact it will fail after so many ticks. A bit strange... Any idea on that? I haven't modified the code yet. gem5.debug warn: DTB file specified, but no device tree support in kernel **** REAL SIMULATION **** warn: Existing EnergyCtrl, but no enabled DVFSHandler found. info: Entering event queue @ 0. Starting simulation... warn: Device system.membus.badaddr_responder accessed by read to address 0x10009018 size=4 gem5.debug: build/ARM/cpu/simple/atomic.cc:378: virtual Fault AtomicSimpleCPU::readMem(Addr, uint8_t*, unsigned int, unsigned int): Assertion `!pkt.isError()' failed. Program aborted at tick 30000 --- BEGIN LIBC BACKTRACE --- build/ARM/gem5.debug(_Z15print_backtracev+0x23)[0x116b887] build/ARM/gem5.debug(_Z12abortHandleri+0x5f)[0x1181581] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f378047fcb0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35)[0x7f377efac0d5] /lib/x86_64-linux-gnu/libc.so.6(abort+0x17b)[0x7f377efaf83b] /lib/x86_64-linux-gnu/libc.so.6(+0x2ed9e)[0x7f377efa4d9e] /lib/x86_64-linux-gnu/libc.so.6(+0x2ee42)[0x7f377efa4e42] build/ARM/gem5.debug(_ZN15AtomicSimpleCPU7readMemEmPhjj+0x449)[0x1509433] build/ARM/gem5.debug(_ZN17SimpleExecContext7readMemEmPhjj+0x52)[0x1516e4e] build/ARM/gem5.debug(_Z13readMemTimingI11ExecContextjESt10shared_ptrI9FaultBaseEPT_PN5Trace10InstRecordEmRT0_j+0x4d)[0x222469b] build/ARM/gem5.debug(_Z13readMemAtomicI11ExecContextjESt10shared_ptrI9FaultBaseEPT_PN5Trace10InstRecordEmRT0_j+0x5d)[0x2224525] build/ARM/gem5.debug(_ZNK10ArmISAInst27LOAD_IMM_AY_PN_SN_UN_WN_SZ47executeEP11ExecContextPN5Trace10InstRecordE+0x1da)[0x21846ca] build/ARM/gem5.debug(_ZN15AtomicSimpleCPU4tickEv+0x5c8)[0x150a41a] But gem5.fast passes that tick number. The command I use is: build/ARM/gem5.fast configs/example/fs.py -b bbench-ics --kernel=vmlinux.smp.mouse.arm --frame-capture build/ARM/gem5.debugconfigs/example/fs.py -b bbench-ics --kernel=vmlinux.smp.mouse.arm --frame-capture Regards, Mahmood IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. _______________________________________________ gem5-users mailing list [email protected]<mailto:[email protected]> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
