Hey Nikos, I'm not sure I know exactly how to remove all these annoying systemd services. Currently Hoa is assigned this task: https://gem5.atlassian.net/browse/GEM5-1177
@Hoa can you make this a top priority for you? I think 6+ hours for a boot is a bit too much. I'm sure there must be a way to modify this disk image to make it faster. To answer your second question, this should work: ``` image = CustomDiskImageResource( local_path = "path/to/your/disk/image/here", disk_root_partition = "1", # This is the partition in the disk image to use. 'None' if there is no disk image ) board.set_kernel_disk_workload( kernel = Resource("riscv-bootloader-vmlinux-5.10"), disk_image = image, ) ``` Dr. Bobby R. Bruce Room 3050, Kemper Hall, UC Davis Davis, CA, 95616 web: https://www.bobbybruce.net On Sat, Feb 12, 2022 at 7:19 AM Νικόλαος Ταμπουρατζής via gem5-users < gem5-users@gem5.org> wrote: > Dear all, > > I have successfully emulated the riscv-ubuntu.img through qemu! The > problem was that I use Ubuntu 20.04 and it requires the Hirsute’s > version of u-boot-qemu (wget > > http://mirrors.kernel.org/ubuntu/pool/main/u/u-boot/u-boot-qemu_2021.01+dfsg-3ubuntu9_all.deb) > and not the standard through the apt > install. > > Now I have two questions: > > 1) How can I disable the huge number of services in order to speedup > the gem5 boot process through qemu? > > 2) When I execute the following: "./build/RISCV/gem5.opt > configs/example/gem5_library/riscv-ubuntu-run.py", it downloads > automatically the riscv-ubuntu-20.04-img. How can I set another image? > The --disk-image option is not working. > > > Thank you in advance!!! > Best regards, > Nikos > > > Quoting Νικόλαος Ταμπουρατζής via gem5-users <gem5-users@gem5.org>: > > > Dear Hoa, > > > > Thank you very much for your information! I try to emulate the > > ubuntu-image through qemu (following this tutorial: > > http://resources.gem5.org/resources/riscv-ubuntu) and I get the > > following TFTP error: > > > > I appreciate any help!! > > > > Best regards, > > Nikos > > > > > > cossim@cossim-virtual-machine:~/riscv-ubuntu$ > > ./qemu/build/qemu-system-riscv64 -machine virt -nographic \ > >> -m 16384 -smp 8 \ > >> -bios /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.elf \ > >> -kernel /usr/lib/u-boot/qemu-riscv64_smode/uboot.elf \ > >> -device virtio-net-device,netdev=eth0 \ > >> -netdev user,id=eth0,hostfwd=tcp::5555-:22 \ > >> -drive file=ubuntu.img,format=raw,if=virtio > > > > OpenSBI v0.9 > > ____ _____ ____ _____ > > / __ \ / ____| _ \_ _| > > | | | |_ __ ___ _ __ | (___ | |_) || | > > | | | | '_ \ / _ \ '_ \ \___ \| _ < | | > > | |__| | |_) | __/ | | |____) | |_) || |_ > > \____/| .__/ \___|_| |_|_____/|____/_____| > > | | > > |_| > > > > Platform Name : riscv-virtio,qemu > > Platform Features : timer,mfdeleg > > Platform HART Count : 8 > > Firmware Base : 0x80000000 > > Firmware Size : 156 KB > > Runtime SBI Version : 0.2 > > > > Domain0 Name : root > > Domain0 Boot HART : 5 > > Domain0 HARTs : 0*,1*,2*,3*,4*,5*,6*,7* > > Domain0 Region00 : 0x0000000080000000-0x000000008003ffff () > > Domain0 Region01 : 0x0000000000000000-0xffffffffffffffff (R,W,X) > > Domain0 Next Address : 0x0000000080200000 > > Domain0 Next Arg1 : 0x0000000082200000 > > Domain0 Next Mode : S-mode > > Domain0 SysReset : yes > > > > Boot HART ID : 5 > > Boot HART Domain : root > > Boot HART ISA : rv64imafdcsu > > Boot HART Features : scounteren,mcounteren,time > > Boot HART PMP Count : 16 > > Boot HART PMP Granularity : 4 > > Boot HART PMP Address Bits: 54 > > Boot HART MHPM Count : 0 > > Boot HART MHPM Count : 0 > > Boot HART MIDELEG : 0x0000000000000222 > > Boot HART MEDELEG : 0x000000000000b109 > > > > > > U-Boot 2021.01+dfsg-3ubuntu0~20.04.4 (Sep 21 2021 - 15:55:38 +0000) > > > > CPU: rv64imafdcsu > > Model: riscv-virtio,qemu > > DRAM: 16 GiB > > In: uart@10000000 > > Out: uart@10000000 > > Err: uart@10000000 > > Net: eth0: virtio-net#0 > > Hit any key to stop autoboot: 0 > > > > Device 0: 1af4 VirtIO Block Device > > Type: Hard Disk > > Capacity: 13824.0 MB = 13.5 GB (28311552 x 512) > > ... is now current device > > Scanning virtio 0:1... > > Found /boot/extlinux/extlinux.conf > > Retrieving file: /boot/extlinux/extlinux.conf > > 755 bytes read in 4 ms (183.6 KiB/s) > > U-Boot menu > > 1: Ubuntu 20.04.3 LTS 5.11.0-1017-generic > > 2: Ubuntu 20.04.3 LTS 5.11.0-1017-generic (rescue target) > > Enter choice: 1: Ubuntu 20.04.3 LTS 5.11.0-1017-generic > > Retrieving file: /boot/initrd.img-5.11.0-1017-generic > > 170008555 bytes read in 728 ms (222.7 MiB/s) > > Retrieving file: /boot/vmlinuz-5.11.0-1017-generic > > 25258496 bytes read in 148 ms (162.8 MiB/s) > > append: root=LABEL=cloudimg-rootfs ro earlycon > > Retrieving file: > /lib/firmware/5.11.0-1017-generic/device-tree/qemu-riscv.dtb > > Failed to load > '/lib/firmware/5.11.0-1017-generic/device-tree/qemu-riscv.dtb' > > Skipping l0 for failure retrieving fdt > > 2: Ubuntu 20.04.3 LTS 5.11.0-1017-generic (rescue target) > > Retrieving file: /boot/initrd.img-5.11.0-1017-generic > > 170008555 bytes read in 44 ms (3.6 GiB/s) > > Retrieving file: /boot/vmlinuz-5.11.0-1017-generic > > 25258496 bytes read in 12 ms (2 GiB/s) > > append: root=LABEL=cloudimg-rootfs ro earlycon single > > Retrieving file: > /lib/firmware/5.11.0-1017-generic/device-tree/qemu-riscv.dtb > > Failed to load > '/lib/firmware/5.11.0-1017-generic/device-tree/qemu-riscv.dtb' > > Skipping l0r for failure retrieving fdt > > SCRIPT FAILED: continuing... > > libfdt fdt_check_header(): FDT_ERR_BADMAGIC > > Scanning disk virtio-blk#8... > > ** Unrecognized filesystem type ** > > ** Unrecognized filesystem type ** > > Found 6 disks > > ** Invalid partition 21 ** > > Cannot read EFI system partition > > BootOrder not defined > > EFI boot manager: Cannot load any image > > Scanning virtio 0:f... > > ** Unable to read file / ** > > Failed to load '/' > > libfdt fdt_check_header(): FDT_ERR_BADMAGIC > > BootOrder not defined > > EFI boot manager: Cannot load any image > > scanning bus for devices... > > > > Device 0: unknown device > > BOOTP broadcast 1 > > DHCP client bound to address 10.0.2.15 (4 ms) > > Using virtio-net#0 device > > TFTP from server 10.0.2.2; our IP address is 10.0.2.15 > > Filename 'boot.scr.uimg'. > > Load address: 0x88100000 > > Loading: * > > TFTP error: 'Access violation' (2) > > Not retrying... > > BOOTP broadcast 1 > > DHCP client bound to address 10.0.2.15 (1 ms) > > Using virtio-net#0 device > > TFTP from server 10.0.2.2; our IP address is 10.0.2.15 > > Filename 'boot.scr.uimg'. > > Load address: 0x84000000 > > Loading: * > > TFTP error: 'Access violation' (2) > > Not retrying... > > => > > > > > > > > > > Quoting Hoa Nguyen via gem5-users <gem5-users@gem5.org>: > > > >> Hi, > >> > >> It also took 6+ hours to boot Linux using that disk image on my end, so > I > >> think it's systemd being very slow. > >> > >> By profiling systemd, I find that systemd took a lot of time to bring up > >> the networking service, and especially the "motd" (message of the day?) > >> service, which queries for updates from Ubuntu servers. > >> > >> We can turn off the motd service, which would improve the booting time > by a > >> lot. However, I don't really know how to turn off the network service. > >> > >> I hope that somebody will help with the systemd stuff. > >> > >> Regards, > >> Hoa Nguyen > >> > >> On Fri, Feb 11, 2022 at 4:57 AM Νικόλαος Ταμπουρατζής via gem5-users < > >> gem5-users@gem5.org> wrote: > >> > >>> Dear community, > >>> > >>> I have just downloaded the latest version of gem5 (v21.2.1) and I try > >>> to simulate the FS using the riscv-ubuntu-run.py > >>> (./build/RISCV/gem5.opt > >>> configs/example/gem5_library/riscv-ubuntu-run.py). It downloads > >>> automatically both riscv-ubuntu-20.04-img and > >>> riscv-bootloader-vmlinux-5.10. However, after 4 hours the system is > >>> not completely booted. > >>> > >>> How many hours it is required to boot? > >>> How can I disable the systemd services from riscv-ubuntu-20.04-img? > >>> > >>> I found the following link but I cannot emulate the image through > >>> qemu: http://resources.gem5.org/resources/riscv-ubuntu > >>> > >>> Best regards, > >>> Nikos > >>> > >>> Here is the output (through m5term): > >>> > >>> ==== m5 terminal: Terminal 0 ==== > >>> [ 0.000000] Linux version 5.10.0 (hn@amarillo) > >>> (riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, GNU ld > >>> (GNU Binutils for Ubuntu) 2.30) #1 SMP Mon Jul 19 13:32:59 PDT 2021 > >>> [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 > >>> [ 0.000000] efi: UEFI not found. > >>> [ 0.000000] Zone ranges: > >>> [ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000ffffffff] > >>> [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] > >>> [ 0.000000] Movable zone start for each node > >>> [ 0.000000] Early memory node ranges > >>> [ 0.000000] node 0: [mem 0x0000000080200000-0x000000013fffffff] > >>> [ 0.000000] Initmem setup node 0 [mem > >>> 0x0000000080200000-0x000000013fffffff] > >>> [ 0.000000] software IO TLB: mapped [mem > >>> 0x00000000fbfff000-0x00000000fffff000] (64MB) > >>> [ 0.000000] SBI specification v0.1 detected > >>> [ 0.000000] riscv: ISA extensions acdfim > >>> [ 0.000000] riscv: ELF capabilities acdfim > >>> [ 0.000000] percpu: Embedded 16 pages/cpu s26200 r8192 d31144 u65536 > >>> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: > >>> 775175 > >>> [ 0.000000] Kernel command line: console=ttyS0 root=/dev/vda1 ro > >>> [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, > >>> 4194304 bytes, linear) > >>> [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, > >>> 2097152 bytes, linear) > >>> [ 0.000000] Sorting __ex_table... > >>> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off > >>> [ 0.000000] Memory: 3014996K/3143680K available (5866K kernel code, > >>> 3086K rwdata, 2048K rodata, 189K init, 341K bss, 128684K reserved, 0K > >>> cma-reserved) > >>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, > Nodes=1 > >>> [ 0.000000] rcu: Hierarchical RCU implementation. > >>> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to > >>> nr_cpu_ids=2. > >>> [ 0.000000] Tracing variant of Tasks RCU enabled. > >>> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay > >>> is 25 jiffies. > >>> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, > nr_cpu_ids=2 > >>> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > >>> [ 0.000000] riscv-intc: 64 local interrupts mapped > >>> [ 0.000000] plic: plic@c000000: mapped 10 interrupts with 2 > >>> handlers for 4 contexts. > >>> [ 0.000000] random: get_random_bytes called from > >>> start_kernel+0x316/0x496 with crng_init=0 > >>> [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] > >>> hartid [1] > >>> [ 0.000000] clocksource: riscv_clocksource: mask: > >>> 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 > ns > >>> [ 0.000014] sched_clock: 64 bits at 10MHz, resolution 100ns, wraps > >>> every 4398046511100ns > >>> [ 0.000269] Console: colour dummy device 80x25 > >>> [ 0.000322] Calibrating delay loop (skipped), value calculated > >>> using timer frequency.. 20.00 BogoMIPS (lpj=40000) > >>> [ 0.000363] pid_max: default: 32768 minimum: 301 > >>> [ 0.000710] Mount-cache hash table entries: 8192 (order: 4, 65536 > >>> bytes, linear) > >>> [ 0.000776] Mountpoint-cache hash table entries: 8192 (order: 4, > >>> 65536 bytes, linear) > >>> [ 0.002680] rcu: Hierarchical SRCU implementation. > >>> [ 0.002885] EFI services will not be available. > >>> [ 0.003051] smp: Bringing up secondary CPUs ... > >>> [ 0.003724] smp: Brought up 1 node, 2 CPUs > >>> [ 0.004415] devtmpfs: initialized > >>> [ 0.006194] clocksource: jiffies: mask: 0xffffffff max_cycles: > >>> 0xffffffff, max_idle_ns: 7645041785100000 ns > >>> [ 0.006230] futex hash table entries: 512 (order: 3, 32768 bytes, > >>> linear) > >>> [ 0.006736] NET: Registered protocol family 16 > >>> [ 0.030604] vgaarb: loaded > >>> [ 0.031121] SCSI subsystem initialized > >>> [ 0.031625] usbcore: registered new interface driver usbfs > >>> [ 0.031716] usbcore: registered new interface driver hub > >>> [ 0.031801] usbcore: registered new device driver usb > >>> [ 0.033017] clocksource: Switched to clocksource riscv_clocksource > >>> [ 0.042536] NET: Registered protocol family 2 > >>> [ 0.043824] tcp_listen_portaddr_hash hash table entries: 2048 > >>> (order: 3, 32768 bytes, linear) > >>> [ 0.043977] TCP established hash table entries: 32768 (order: 6, > >>> 262144 bytes, linear) > >>> [ 0.045452] TCP bind hash table entries: 32768 (order: 7, 524288 > >>> bytes, linear) > >>> [ 0.047006] TCP: Hash tables configured (established 32768 bind > 32768) > >>> [ 0.047159] UDP hash table entries: 2048 (order: 4, 65536 bytes, > linear) > >>> [ 0.047434] UDP-Lite hash table entries: 2048 (order: 4, 65536 > >>> bytes, linear) > >>> [ 0.047867] NET: Registered protocol family 1 > >>> [ 0.048364] RPC: Registered named UNIX socket transport module. > >>> [ 0.048386] RPC: Registered udp transport module. > >>> [ 0.048407] RPC: Registered tcp transport module. > >>> [ 0.048430] RPC: Registered tcp NFSv4.1 backchannel transport > module. > >>> [ 0.048455] PCI: CLS 0 bytes, default 64 > >>> [ 0.049441] workingset: timestamp_bits=62 max_order=20 > bucket_order=0 > >>> [ 0.065711] NFS: Registering the id_resolver key type > >>> [ 0.065789] Key type id_resolver registered > >>> [ 0.065809] Key type id_legacy registered > >>> [ 0.066012] nfs4filelayout_init: NFSv4 File Layout Driver > Registering... > >>> [ 0.066503] NET: Registered protocol family 38 > >>> [ 0.066560] Block layer SCSI generic (bsg) driver version 0.4 > >>> loaded (major 254) > >>> [ 0.066583] io scheduler mq-deadline registered > >>> [ 0.066604] io scheduler kyber registered > >>> [ 0.123474] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > >>> [ 0.125216] printk: console [ttyS0] disabled > >>> [ 0.125267] 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 1, > >>> base_baud = 230400) is a 8250 > >>> [ 0.128120] printk: console [ttyS0] enabled > >>> [ 0.128546] [drm] radeon kernel modesetting enabled. > >>> [ 0.136743] loop: module loaded > >>> [ 0.137115] virtio_blk virtio0: [vda] 28311552 512-byte logical > >>> blocks (14.5 GB/13.5 GiB) > >>> [ 0.137180] vda: detected capacity change from 0 to 14495514624 > >>> [ 0.141193] vda: vda1 vda12 vda13 vda14 vda15 > >>> [ 0.143968] libphy: Fixed MDIO Bus: probed > >>> [ 0.145274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) > Driver > >>> [ 0.145323] ehci-pci: EHCI PCI platform driver > >>> [ 0.145415] ehci-platform: EHCI generic platform driver > >>> [ 0.145522] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > >>> [ 0.145569] ohci-pci: OHCI PCI platform driver > >>> [ 0.145661] ohci-platform: OHCI generic platform driver > >>> [ 0.146095] usbcore: registered new interface driver uas > >>> [ 0.146215] usbcore: registered new interface driver usb-storage > >>> [ 0.146407] mousedev: PS/2 mouse device common for all mice > >>> [ 0.146782] usbcore: registered new interface driver usbhid > >>> [ 0.146824] usbhid: USB HID core driver > >>> [ 0.148347] NET: Registered protocol family 10 > >>> [ 0.149582] Segment Routing with IPv6 > >>> [ 0.149730] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > >>> [ 0.150694] NET: Registered protocol family 17 > >>> [ 0.150832] Key type dns_resolver registered > >>> [ 0.154215] EXT4-fs (vda1): INFO: recovery required on readonly > >>> filesystem > >>> [ 0.154269] EXT4-fs (vda1): write access will be enabled during > recovery > >>> [ 0.243877] EXT4-fs (vda1): recovery complete > >>> [ 0.244090] EXT4-fs (vda1): mounted filesystem with ordered data > >>> mode. Opts: (null) > >>> [ 0.244181] VFS: Mounted root (ext4 filesystem) readonly on device > >>> 254:1. > >>> [ 0.244469] devtmpfs: mounted > >>> [ 0.244648] Freeing unused kernel memory: 188K > >>> [ 0.245022] Run /sbin/init as init process > >>> > >>> [ 0.311595] systemd[1]: System time before build time, advancing > clock. > >>> [ 0.319136] random: fast init done > >>> [ 0.339740] systemd[1]: systemd 245.4-4ubuntu3.13 running in system > >>> mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP > >>> +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS > >>> +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) > >>> [ 0.340109] systemd[1]: Detected architecture riscv64. > >>> > >>> Welcome to Ubuntu 20.04.3 LTS! > >>> > >>> [ 0.342577] systemd[1]: Set hostname to <ubuntu>. > >>> [ 0.629637] random: lvmconfig: uninitialized urandom read (4 bytes > read) > >>> [ 1.914376] random: systemd: uninitialized urandom read (16 bytes > read) > >>> [ 1.916631] systemd[1]: Created slice system-modprobe.slice. > >>> [ OK ] Created slice system-modprobe.slice. > >>> [ 1.917793] random: systemd: uninitialized urandom read (16 bytes > read) > >>> [ 1.918768] systemd[1]: Created slice system-serial\x2dgetty.slice. > >>> [ OK ] Created slice system-serial\x2dgetty.slice. > >>> [ 1.919825] random: systemd: uninitialized urandom read (16 bytes > read) > >>> [ 1.920817] systemd[1]: Created slice system-systemd\x2dfsck.slice. > >>> [ OK ] Created slice system-systemd\x2dfsck.slice. > >>> [ 1.922613] systemd[1]: Created slice User and Session Slice. > >>> [ OK ] Created slice User and Session Slice. > >>> [ 1.924053] systemd[1]: Started Forward Password Requests to Wall > >>> Directory Watch. > >>> [ OK ] Started Forward Password R…uests to Wall Directory Watch. > >>> [ 1.925642] systemd[1]: Condition check resulted in Arbitrary > >>> Executable File Formats File System Automount Point being skipped. > >>> [ 1.926437] systemd[1]: Reached target User and Group Name Lookups. > >>> [ OK ] Reached target User and Group Name Lookups. > >>> [ 1.927723] systemd[1]: Reached target Slices. > >>> [ OK ] Reached target Slices. > >>> [ 1.928838] systemd[1]: Reached target Swap. > >>> [ OK ] Reached target Swap. > >>> [ 1.930581] systemd[1]: Listening on Device-mapper event daemon > FIFOs. > >>> [ OK ] Listening on Device-mapper event daemon FIFOs. > >>> [ 1.932305] systemd[1]: Listening on LVM2 poll daemon socket. > >>> [ OK ] Listening on LVM2 poll daemon socket. > >>> [ 1.933771] systemd[1]: Listening on multipathd control socket. > >>> [ OK ] Listening on multipathd control socket. > >>> [ 1.935386] systemd[1]: Listening on Syslog Socket. > >>> [ OK ] Listening on Syslog Socket. > >>> [ 1.937105] systemd[1]: Listening on fsck to fsckd communication > Socket. > >>> [ OK ] Listening on fsck to fsckd communication Socket. > >>> [ 1.938542] systemd[1]: Listening on initctl Compatibility Named > Pipe. > >>> [ OK ] Listening on initctl Compatibility Named Pipe. > >>> [ 1.948553] systemd[1]: Condition check resulted in Journal Audit > >>> Socket being skipped. > >>> [ 1.949458] systemd[1]: Listening on Journal Socket (/dev/log). > >>> [ OK ] Listening on Journal Socket (/dev/log). > >>> [ 1.951257] systemd[1]: Listening on Journal Socket. > >>> [ OK ] Listening on Journal Socket. > >>> [ 1.953548] systemd[1]: Listening on Network Service Netlink Socket. > >>> [ OK ] Listening on Network Service Netlink Socket. > >>> [ 1.955258] systemd[1]: Listening on udev Control Socket. > >>> [ OK ] Listening on udev Control Socket. > >>> [ 1.956745] systemd[1]: Listening on udev Kernel Socket. > >>> [ OK ] Listening on udev Kernel Socket. > >>> [ 1.958904] systemd[1]: Condition check resulted in Huge Pages File > >>> System being skipped. > >>> [ 1.962932] systemd[1]: Mounting POSIX Message Queue File System... > >>> Mounting POSIX Message Queue File System... > >>> [ 1.965016] systemd[1]: Condition check resulted in Kernel Debug > >>> File System being skipped. > >>> [ 1.966057] systemd[1]: Condition check resulted in Kernel Trace > >>> File System being skipped. > >>> [ 1.971879] systemd[1]: Starting Journal Service... > >>> Starting Journal Service... > >>> [ 1.978118] systemd[1]: Starting Set the console keyboard layout... > >>> Starting Set the console keyboard layout... > >>> [ 1.979297] systemd[1]: Condition check resulted in Create list of > >>> static device nodes for the current kernel being skipped. > >>> [ 1.983066] systemd[1]: Starting Monitoring of LVM2 mirrors, > >>> snapshots etc. using dmeventd or progress polling... > >>> Starting Monitoring of LVM…meventd or progress polling... > >>> [ 1.984562] systemd[1]: Condition check resulted in Load Kernel > >>> Module drm being skipped. > >>> [ 1.985098] systemd[1]: Condition check resulted in OpenVSwitch > >>> configuration for cleanup being skipped. > >>> [ 1.987314] systemd[1]: Condition check resulted in Set Up > >>> Additional Binary Formats being skipped. > >>> [ 1.991069] systemd[1]: Starting File System Check on Root Device... > >>> Starting File System Check on Root Device... > >>> [ 2.001958] systemd[1]: Starting Load Kernel Modules... > >>> Starting Load Kernel Modules... > >>> [ 2.013850] systemd[1]: Starting udev Coldplug all Devices... > >>> Starting udev Coldplug all Devices... > >>> [ 2.036294] systemd[1]: Starting Uncomplicated firewall... > >>> Starting Uncomplicated firewall... > >>> [ 2.077993] systemd[1]: Mounted POSIX Message Queue File System. > >>> [ OK ] Mounted POSIX Message Queue File System. > >>> [ 2.094648] systemd[1]: Finished Uncomplicated firewall. > >>> [ OK ] Finished Uncomplicated firewall. > >>> [ 2.126801] systemd[1]: Finished Load Kernel Modules. > >>> [ OK ] Finished Load Kernel Modules. > >>> [ 2.129153] systemd[1]: Condition check resulted in FUSE Control > >>> File System being skipped. > >>> [ 2.129982] systemd[1]: Condition check resulted in Kernel > >>> Configuration File System being skipped. > >>> [ 2.137942] systemd[1]: Started File System Check Daemon to report > >>> status. > >>> [ OK ] Started File System Check Daemon to report status. > >>> [ 2.154265] systemd[1]: Starting Apply Kernel Variables... > >>> Starting Apply Kernel Variables... > >>> [ 2.247083] systemd[1]: Finished File System Check on Root Device. > >>> [ OK ] Finished File System Check on Root Device. > >>> [ 2.251803] systemd[1]: Starting Remount Root and Kernel File > Systems... > >>> Starting Remount Root and Kernel File Systems... > >>> [ OK ] Finished Apply Kernel Variables. > >>> [ OK ] Finished Remount Root and Kernel File Systems. > >>> [ OK ] Started Journal Service. > >>> Starting Flush Journal to Persistent Storage... > >>> Starting Load/Save Random Seed... > >>> Starting Create System Users... > >>> [ OK ] Finished Create System Users. > >>> Starting Create Static Device Nodes in /dev... > >>> [ OK ] Finished Flush Journal to Persistent Storage. > >>> [ OK ] Finished Create Static Device Nodes in /dev. > >>> Starting udev Kernel Device Manager... > >>> [ OK ] Started udev Kernel Device Manager. > >>> Starting Network Service... > >>> [ OK ] Finished udev Coldplug all Devices. > >>> Starting udev Wait for Complete Device Initialization... > >>> [ OK ] Found device /dev/ttyS0. > >>> [ OK ] Found device /dev/hvc0. > >>> [ OK ] Finished Monitoring of LVM… dmeventd or progress polling. > >>> [ OK ] Finished Set the console keyboard layout. > >>> [ OK ] Started Network Service. > >>> [ OK ] Found device /dev/disk/by-label/UEFI. > >>> [ OK ] Finished udev Wait for Complete Device Initialization. > >>> Starting Device-Mapper Multipath Device Controller... > >>> [ OK ] Started Dispatch Password …ts to Console Directory Watch. > >>> [ OK ] Reached target Local Encrypted Volumes. > >>> Starting Wait for Network to be Configured... > >>> [ OK ] Finished Wait for Network to be Configured. > >>> [FAILED] Failed to start Device-Map…r Multipath Device Controller. > >>> See 'systemctl status multipathd.service' for details. > >>> [ OK ] Reached target Local File Systems (Pre). > >>> Starting File System Check on /dev/disk/by-label/UEFI... > >>> [ OK ] Finished File System Check on /dev/disk/by-label/UEFI. > >>> Mounting /boot/efi... > >>> [ 11.496946] FAT-fs (vda15): codepage cp437 not found > >>> [FAILED] Failed to mount /boot/efi. > >>> See 'systemctl status boot-efi.mount' for details. > >>> [DEPEND] Dependency failed for Local File Systems. > >>> Starting Set console font and keymap... > >>> Starting Create final runt…dir for shutdown pivot root... > >>> Starting Tell Plymouth To Write Out Runtime Data... > >>> Starting Create Volatile Files and Directories... > >>> [ OK ] Finished Create final runt…e dir for shutdown pivot root. > >>> [ OK ] Finished Set console font and keymap. > >>> [ OK ] Finished Tell Plymouth To Write Out Runtime Data. > >>> [ OK ] Finished Create Volatile Files and Directories. > >>> Starting Network Name Resolution... > >>> Starting Network Time Synchronization... > >>> Starting Update UTMP about System Boot/Shutdown... > >>> [ OK ] Finished Update UTMP about System Boot/Shutdown. > >>> [ OK ] Started Network Time Synchronization. > >>> [ OK ] Reached target System Initialization. > >>> [ OK ] Started Daily Cleanup of Temporary Directories. > >>> [ OK ] Reached target Paths. > >>> [ OK ] Reached target System Time Set. > >>> [ OK ] Reached target System Time Synchronized. > >>> [ OK ] Started Daily apt download activities. > >>> [ OK ] Started Daily apt upgrade and clean activities. > >>> [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. > >>> [ OK ] Started Discard unused blocks once a week. > >>> [ OK ] Started Refresh fwupd metadata regularly. > >>> [ OK ] Started Daily rotation of log files. > >>> [ OK ] Started Daily man-db regeneration. > >>> [ OK ] Started Message of the Day. > >>> [ OK ] Started Ubuntu Advantage update messaging. > >>> [ OK ] Reached target Timers. > >>> [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. > >>> [ OK ] Listening on D-Bus System Message Bus Socket. > >>> [ OK ] Listening on Open-iSCSI iscsid Socket. > >>> [ OK ] Listening on UUID daemon activation socket. > >>> [ OK ] Reached target Sockets. > >>> [ OK ] Reached target Basic System. > >>> Starting Accounts Service... > >>> Starting Avahi mDNS/DNS-SD Stack... > >>> [ OK ] Started D-Bus System Message Bus. > >>> Starting Network Manager... > >>> [ OK ] Started Save initial kernel messages after boot. > >>> Starting Remove Stale Onli…t4 Metadata Check Snapshots... > >>> [ OK ] Started irqbalance daemon. > >>> Starting Dispatcher daemon for systemd-networkd... > >>> [ OK ] Started Set the CPU Frequency Scaling governor. > >>> Starting Authorization Manager... > >>> Starting Restore /etc/reso… the ppp link was shut down... > >>> Starting System Logging Service... > >>> Starting Login Service... > >>> Starting Disk Manager... > >>> Starting WPA supplicant... > >>> [ OK ] Started Network Name Resolution. > >>> [ OK ] Finished Restore /etc/reso…re the ppp link was shut down. > >>> [ OK ] Reached target Host and Network Name Lookups. > >>> [ OK ] Started System Logging Service. > >>> [ OK ] Started Avahi mDNS/DNS-SD Stack. > >>> [ OK ] Started WPA supplicant. > >>> [ OK ] Started Network Manager. > >>> [ OK ] Reached target Network. > >>> Starting Network Manager Wait Online... > >>> [ OK ] Started Authorization Manager. > >>> Starting Modem Manager... > >>> Starting Hostname Service... > >>> [ OK ] Started Login Service. > >>> [ OK ] Started Unattended Upgrades Shutdown. > >>> [ OK ] Started Accounts Service. > >>> [ OK ] Started Modem Manager. > >>> [ OK ] Started Disk Manager. > >>> [ OK ] Started Hostname Service. > >>> > >>> > >>> _______________________________________________ > >>> gem5-users mailing list -- gem5-users@gem5.org > >>> To unsubscribe send an email to gem5-users-le...@gem5.org > >>> %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s > > > > > > _______________________________________________ > > gem5-users mailing list -- gem5-users@gem5.org > > To unsubscribe send an email to gem5-users-le...@gem5.org > > %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s > > > _______________________________________________ > gem5-users mailing list -- gem5-users@gem5.org > To unsubscribe send an email to gem5-users-le...@gem5.org > %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
_______________________________________________ gem5-users mailing list -- gem5-users@gem5.org To unsubscribe send an email to gem5-users-le...@gem5.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s