If you haven't modified any code, it is most likely with how your fs.py configures the devices. You have to make sure no device can pass its address range back through multiple paths (ie. devices cannot be connected to multiple bridges that connect to one bus), and no two devices have the same address ranges set. The best way is to post your fs.py file so some here can help if they are able.
Geoff -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Shoaib Akram Sent: Monday, May 04, 2009 2:40 PM To: [email protected] Subject: [m5-users] Range Error I am getting a "Two devices with same range" error. I have never been involved with the Range business. Can some one give hints as to where to look for the problem. I am running fs.py with a few extra bridges. Is this problem need to be resolved at the front-end or tweaking bus.cc? _______________________________________________ m5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/m5-users No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.287 / Virus Database: 270.12.16/2094 - Release Date: 05/03/09 16:51:00 _______________________________________________ m5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
