-Tony _______________________________________________ m5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
The reason it seems that the instruction is not being removed is because
cpu1's drain function is never being called. cpu0 drains and returns,
then switchout is being called immediately. I put debug printfs in the
SimObject drain function and those seem to be getting called for every
SimObject in the system. However, the cpu specific drain function is
only being called for cpu0 according to the debug printfs I put there. I
also can't see where the cpu version of drain() is being called. Is cpu1
being treated differently than cpu1 in the system?
- [m5-users] Switching back and forth between cores. Anthony Gutierrez
- Re: [m5-users] Switching back and forth between cor... Anthony Gutierrez
- Re: [m5-users] Switching back and forth between... Ali Saidi
- Re: [m5-users] Switching back and forth bet... Anthony Gutierrez
- Re: [m5-users] Switching back and forth... Ali Saidi
- Re: [m5-users] Switching back and forth... Korey Sewell
- Re: [m5-users] Switching back and forth between cor... Anthony Gutierrez
- Re: [m5-users] Switching back and forth between... Korey Sewell
