The best place to see what parameters and ports are on SimObjects is to look in the src directory for .py files. That's where the SimObjects are defined. The values in those files are defaults, and not meant for actually configuring things.
The scripts that are normally used to set up a simulation are in the configs directory. You are encouraged to make your own scripts using those as an example, but you can also use those directly, especially to get started. Those scripts (in particular your versions of them) are where you should configure the SimObjects. Gabe On 05/16/11 21:19, xuewen zhou wrote: > I have read this part ，but where could I get the ports’ name and how > could I connect them？（for example how could I know the > DMA_controller‘s port and how to connect them to Ruby system ），Thank > you very much！ > > 2011/5/17 Gabriel Michael Black <[email protected] > <mailto:[email protected]>> > > This should get you started. > > http://m5sim.org/Simulation_Scripts_Explained > > > Quoting xuewen zhou <[email protected] > <mailto:[email protected]>>: > > hello,Gabe, > Could you tell me where I find the hardware confige file in > M5. Or I should > ask that ,now I have design > a hardware system which contais two ARM cores , DMA ,crossbar > and other > modules ,I want to implement this system in M5 , how could > I config it (or which files I can use in M5,or how could I do > ) ? Thank you > very much! > > > 2011/3/22 Gabriel Michael Black <[email protected] > <mailto:[email protected]>> > > There's some documentation on the website you might find > helpful. You > should read through that first. > > www.m5sim.org <http://www.m5sim.org> > > Gabe > > > Quoting xuewen zhou <[email protected] > <mailto:[email protected]>>: > > Thank you very much ! > > > Could you tell me how to get the help of command line > parameter,such as -n > (or how could you know to use '-n' as the parameter of > core number.)And > how > to set other parameters ,such as cpu frequency , > memory size and so on > ,where could I get help about these and othe useful > command. > > Best regards! > 2011/3/21 Nilay Vaish <[email protected] > <mailto:[email protected]>> > > On Mon, 21 Mar 2011, xuewen zhou wrote: > > > hello , every body ,could someone tell me how to > use M5(configure it with > > the number cores , connection--crossbar,and > memory),Thank you very much! > > > The number of cores is configured with the > command line parameter '-n', > > as > in -n 4 would create a four-processor system. Ruby > uses Crossbar by > default, > so as such there is no need to change the > topology. You can do so by > using > the option --topology <topology name>. The > available topologies are in > the > directory src/mem/ruby/network/topologies. > > Have a look at the file configs/common/Options.py > for more command line > parameters. > > -- > Nilay > _______________________________________________ > m5-users mailing list > [email protected] <mailto:[email protected]> > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users > > > > > -- > Xuewen Zhou Master > Shanghai Jiaotong University > School of Microelectronics > National Engineering Laboratory For Automotive > Electronic Control > Technology > 800 Dongchuan Road, Shanghai 200240, P. R. China > Phone : 13062728106 > > > > _______________________________________________ > m5-users mailing list > [email protected] <mailto:[email protected]> > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users > > > > > -- > Xuewen Zhou Master > Shanghai Jiaotong University > School of Microelectronics > National Engineering Laboratory For Automotive Electronic > Control Technology > 800 Dongchuan Road, Shanghai 200240, P. R. China > Phone : 13062728106 > > > > _______________________________________________ > gem5-users mailing list > [email protected] <mailto:[email protected]> > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > > > > -- > Xuewen Zhou Master > Shanghai Jiaotong University > School of Microelectronics > National Engineering Laboratory For Automotive Electronic Control > Technology > 800 Dongchuan Road, Shanghai 200240, P. R. China > Phone : 13062728106 > > > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
