hello，Gabe ， I am still another question ： in DMA_controller.py，there is no port，in RubyController，there is also no port ，could I add port myself ？ or do something else to get the DMA_controller‘s port ？Thank you！
在 2011年5月17日 下午5:48，Gabe Black <[email protected]>写道： > The best place to see what parameters and ports are on SimObjects is to > look in the src directory for .py files. That's where the SimObjects are > defined. The values in those files are defaults, and not meant for actually > configuring things. > > The scripts that are normally used to set up a simulation are in the > configs directory. You are encouraged to make your own scripts using those > as an example, but you can also use those directly, especially to get > started. Those scripts (in particular your versions of them) are where you > should configure the SimObjects. > > Gabe > > > On 05/16/11 21:19, xuewen zhou wrote: > > I have read this part ，but where could I get the ports’ name and how could > I connect them？（for example how could I know the DMA_controller‘s port and > how to connect them to Ruby system ），Thank you very much！ > > 2011/5/17 Gabriel Michael Black <[email protected]> > >> This should get you started. >> >> http://m5sim.org/Simulation_Scripts_Explained >> >> >> Quoting xuewen zhou <[email protected]>: >> >> hello,Gabe, >>> Could you tell me where I find the hardware confige file in M5. Or I >>> should >>> ask that ,now I have design >>> a hardware system which contais two ARM cores , DMA ,crossbar and other >>> modules ,I want to implement this system in M5 , how could >>> I config it (or which files I can use in M5,or how could I do ) ? Thank >>> you >>> very much! >>> >>> >>> 2011/3/22 Gabriel Michael Black <[email protected]> >>> >>> There's some documentation on the website you might find helpful. You >>>> should read through that first. >>>> >>>> www.m5sim.org >>>> >>>> Gabe >>>> >>>> >>>> Quoting xuewen zhou <[email protected]>: >>>> >>>> Thank you very much ! >>>> >>>>> >>>>> Could you tell me how to get the help of command line parameter,such as >>>>> -n >>>>> (or how could you know to use '-n' as the parameter of core number.)And >>>>> how >>>>> to set other parameters ,such as cpu frequency , memory size and so on >>>>> ,where could I get help about these and othe useful command. >>>>> >>>>> Best regards! >>>>> 2011/3/21 Nilay Vaish <[email protected]> >>>>> >>>>> On Mon, 21 Mar 2011, xuewen zhou wrote: >>>>> >>>>>> >>>>>> hello , every body ,could someone tell me how to use M5(configure it >>>>>> with >>>>>> >>>>>> the number cores , connection--crossbar,and memory),Thank you very >>>>>>> much! >>>>>>> >>>>>>> >>>>>>> The number of cores is configured with the command line parameter >>>>>>> '-n', >>>>>>> >>>>>> as >>>>>> in -n 4 would create a four-processor system. Ruby uses Crossbar by >>>>>> default, >>>>>> so as such there is no need to change the topology. You can do so by >>>>>> using >>>>>> the option --topology <topology name>. The available topologies are in >>>>>> the >>>>>> directory src/mem/ruby/network/topologies. >>>>>> >>>>>> Have a look at the file configs/common/Options.py for more command >>>>>> line >>>>>> parameters. >>>>>> >>>>>> -- >>>>>> Nilay >>>>>> _______________________________________________ >>>>>> m5-users mailing list >>>>>> [email protected] >>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users >>>>>> >>>>>> >>>>>> >>>>> >>>>> -- >>>>> Xuewen Zhou Master >>>>> Shanghai Jiaotong University >>>>> School of Microelectronics >>>>> National Engineering Laboratory For Automotive Electronic Control >>>>> Technology >>>>> 800 Dongchuan Road, Shanghai 200240, P. R. China >>>>> Phone : 13062728106 >>>>> >>>>> >>>>> >>>> _______________________________________________ >>>> m5-users mailing list >>>> [email protected] >>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users >>>> >>>> >>> >>> >>> -- >>> Xuewen Zhou Master >>> Shanghai Jiaotong University >>> School of Microelectronics >>> National Engineering Laboratory For Automotive Electronic Control >>> Technology >>> 800 Dongchuan Road, Shanghai 200240, P. R. China >>> Phone : 13062728106 >>> >>> >> >> _______________________________________________ >> gem5-users mailing list >> [email protected] >> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users >> > > > > -- > Xuewen Zhou Master > Shanghai Jiaotong University > School of Microelectronics > National Engineering Laboratory For Automotive Electronic Control > Technology > 800 Dongchuan Road, Shanghai 200240, P. R. China > Phone : 13062728106 > > > _______________________________________________ > gem5-users mailing > [email protected]http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > > > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > -- Xuewen Zhou Master Shanghai Jiaotong University School of Microelectronics National Engineering Laboratory For Automotive Electronic Control Technology 800 Dongchuan Road, Shanghai 200240, P. R. China Phone : 13062728106
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
