On Mon, Sep 25, 2006 at 09:22:09AM -0400, [EMAIL PROTECTED] wrote: > Comments:
[...] > The -01 version would be ok to publish as-is, but I concur with > Cullen Jennings's comment that use of RFC 2119 language is > appropriate, and I specifically suggest a couple of "MUST"s in > the second paragraph of Section 3.2 to require the use of EtherType > hex 814C and use of SNAP with LLC. I happen to know from history > that IEEE is somewhat sensitive about proper EtherType usage. Does the following rephrased text address your comment: When serialized SNMP messages are sent in IEEE 802.3 frames (and in other IEEE 802 MAC frame types that can natively represent Ethernet type values), the Ethernet type field value of 33100 (hexadecimal 814C) MUST be used as the link layer protocol identifier. In IEEE 802 LANs that use LLC as the means of link layer protocol identification, such as IEEE 802.11 Wireless LANs, the SNAP encapsulation method described in subclause 10.5 "Encapsulation of Ethernet frames over LLC" in [IEEE802] MUST be used. > IANA needs clarification of what to do about SNMP domain > registration - see the IANA comment in the I-D tracker. This is taken care of in the -02 version (which still sits in the queue). Thanks, /js -- Juergen Schoenwaelder International University Bremen <http://www.eecs.iu-bremen.de/> P.O. Box 750 561, 28725 Bremen, Germany _______________________________________________ Gen-art mailing list [email protected] https://www1.ietf.org/mailman/listinfo/gen-art
