Kathleen,

Thanks much for your comments. I have incorporated them in the next revision
of the document. 

Thanks,
Ayan


On 1/19/11 9:24 AM, "[email protected]" <[email protected]>
wrote:

> I am the assigned Gen-ART reviewer for this draft. For background on
> 
> Gen-ART, please see the FAQ at
> 
> <http://wiki.tools.ietf.org/area/gen/trac/wiki/GenArtfaq>.
> 
> 
> 
> Please resolve these comments along with any other Last Call comments you may
> receive.
> 
> 
> 
> Document: draft-ietf-isis-layer2-09
> 
> Reviewer: Kathleen Moriarty
> 
> Review Date: 19 January 2011
> 
> IETF LC End Date:
> 
> IESG Telechat date: (if known)
> 
> 
> 
> Summary:  The document looks pretty good overall, but there are some edits
> that are recommended below.
> 
> 
> Major issues:
> 
> 
> 
> Minor issues:
> 
> 
> 
> 
> 
> 
> 
> Nits/editorial comments:
> 
> Abstract:
> 
> Include name for acronym TLV and IS-IS, both are used before being defined.
> 
> 
> 
> Include commas in the following sentence:
> 
> Change from: ³in this document are generic layer 2 additions and specific ones
> as needed are²
> 
> To: ³in this document are generic layer 2 additions and specific ones, as
> needed, are²
> 
> 
> 
> Section 1:
> 
> Paragraph 1, Line 5:
> 
> Change From: Layer
> 
> To: layer
> 
> 
> 
> Paragraph 2, Line 2:
> 
> Include acronym for PDU
> 
> 
> 
> Paragraph 2, Line 3:
> 
> Change from: ³generic layer 2 additions and specific ones as needed are
> defined in²
> 
> To: ³generic layer 2 additions and specific ones, as needed, are defined in²
> 
> 
> 
> Section 2:
> 
> Line 1:
> 
> Change from: ³In this section we specify the enhancements²
> 
> To either: ³This section specifies the enhancements²
> 
> Or: ³In this section, we specify the enhancements²
> 
> 
> 
> Line 2:
> 
> Change from: ³Layer-2²
> 
> To: ³layer 2²
> 
> OR make the use of this consistent in the document.
> 
> 
> Section 2.1:
> 
> Bullet 4:
> 
> Make use of ³Layer-2-IS-IS² consistent in the document.
> 
> 
> 
> Paragraph 2:
> 
> Note use of Level 1 and Layer 2 in this paragraph to make consistent (dash/no
> dash, upper or lower case ³L²)
> 
> 
> 
> Define acronym LSP in first line
> 
> 
> 
> Section 2.2:
> 
> Line 1:
> 
> Change from: ³Multi Topology aware²
> 
> To: ³Multi-Topology Aware²
> 
> 
> 
> Bullet 5 (acronym already defined, it can be completely spelled out or use the
> defined acronym):
> 
> Change From: ³sub-TLVs: The MT aware Port Capabilities TLV²
> 
> To: ³sub-TLVs: The MT-PORT_CAP TLV²
> 
> 
> 
> Last sentence: Include acronym for IIH.
> 
> 

_______________________________________________
Gen-art mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/gen-art

Reply via email to