You could open your config section and After selecting playlist rotation rules near the bottom of the window is the playlist logic section. After selecting clockwheel you compose in the window SAM opens or after a bit of practice just open any clockwheel in SAM through Notepad and write up and save any clockwheels you want.
After you have them saved open The event scheduler and follow the window to fully schedule a new event. When you schedule the time I'd suggest having the switch take place 2 or 3 minutes before the top of the hour. Estimate your average song length and adjust accordingly. Last create a simple pal that contains just a single command Queue.Clear; Have the event scheduler call and run that very short PAL about 30 seconds /after/ you have loaded the new clockwheel and SAM will dump your queue and start loading the queue from the category you wish. Grampa Al Bill Curd wrote: > Can you point me towards something that would explain how this is done? > > Thanks > Bill > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > James Henline > Sent: Friday, January 02, 2009 12:23 AM > To: [email protected] > Subject: Re: [General-discussion] pal script for cat > > Bill, this could best be handled by creating a clockwheel for each of those > three categories, then loading them with the event scheduler when needed. > > James Henline. > Help Desk Manager > Development Manager > Spacial Audio Solutions LLC. > 972-739-6420 ext: 110 > www.audiorealm.com > www.spacialnet.com > www.spacialaudio.com > > CONFIDENTIALITY NOTICE: This email, including any attachments, contains > information from SpacialAudio Solutions LLC., which may be confidential or > privileged. The information is intended to be for the use of the individual > or entity named above. If you are not the intended recipient, be aware that > any disclosure, copying, distribution or use of the contents of this > information is prohibited. If you have received this email in error, please > notify the sender immediately by "reply to sender only" message and destroy > all electronic and hard copies of the communication, including attachments. > > > On Thu, Jan 1, 2009 at 11:35 PM, Bill Curd <[email protected]> wrote: > > >> I am looking for an example of a pal script that plays like this >> >> >> >> Cat A 1200 to 0300 >> >> Cat B 0300 to 0600 >> >> Cat C 0600 to 0900 >> >> >> >> And so, I want to use rotation rules so all songs in each Category get >> regular rotation. >> >> Since we play Multiple Genre I want to do this to make the station more >> consistent. >> >> >> >> Looked at special forums but the search did not locate anything like this >> >> >> >> Bill Curd >> >> Hope Radio Online >> >> 270-230-0177 >> >> www.hoperadio.us <http://www.hoperadio.us/> >> >> >> >> _______________________________________________ >> General-discussion mailing list >> [email protected] >> http://mailman.spacialaudio.com/mailman/listinfo/general-discussion >> >> TO unsubscribe to this list, simply send a blank email to >> [email protected] >> >> with the subject >> 'unsubscribe' >> >> > _______________________________________________ > General-discussion mailing list > [email protected] > http://mailman.spacialaudio.com/mailman/listinfo/general-discussion > > TO unsubscribe to this list, simply send a blank email to > [email protected] > > with the subject > 'unsubscribe' > > _______________________________________________ > General-discussion mailing list > [email protected] > http://mailman.spacialaudio.com/mailman/listinfo/general-discussion > > TO unsubscribe to this list, simply send a blank email to > [email protected] > > with the subject > 'unsubscribe' > >
