thanks for your help...I'll let you know how it goes.
Cleve
>
> From: Dustin Puryear <[EMAIL PROTECTED]>
> Date: 2003/02/14 Fri PM 12:33:17 EST
> To: [email protected]
> Subject: Re: Re: [brlug-general] Redhat 7.1 and RAID
>
> I am sure Dell supports them then. I am pretty positive that Dell
> officially supports Linux on those specific servers, and I would assume
> their PERC boards as well.
>
> At 12:27 PM 2/14/2003 -0500, you wrote:
> >These are Dell servers....(2)Poweredge 2550's and (1) Poweredge 6400 for
> >the database server (Oracle)
> >I think Dell uses perc (sp) raid controllers.
> >I didn't have a choice as to the hardware choice....just the opportunity
> >to deploy linux in the production network environment, ya know!!! <G>
> >Thanks,
> >Cleve
> >
> >
> > >
> > > From: "Nat" <[EMAIL PROTECTED]>
> > > Date: 2003/02/14 Fri PM 12:05:53 EST
> > > To: <[email protected]>
> > > Subject: Re: [brlug-general] Redhat 7.1 and RAID
> > >
> > > I'm using an adaptec ATA2400a IDE raid 5 controller with linux 6.2...
> > > (don't know if you're partial to scsi drives or not, IDE is just a cheaper
> > > replacement)
> > > Other than it being a little particular about the bios on the motherboard,
> > > it went in sweet and simple....
> > >
> > > None the less, adaptec is the controller of choice...
> > > and they support linux....
> > >
> > > Nat
> > >
> > >
> > > ----- Original Message -----
> > > From: <[EMAIL PROTECTED]>
> > > To: <[email protected]>
> > > Sent: Friday, February 14, 2003 10:19 AM
> > > Subject: [brlug-general] Redhat 7.1 and RAID
> > >
> > >
> > > > Guys,
> > > > I have the opportunity to add 3 Linux servers to the corporate
> > > > production
> > > environment. I am excited about this but need someone to point me in the
> > > right direction about one of the configuration details.
> > > > All three will use RedHat 7.1, and I believe we will use Advanced
> > > > Server.
> > > > Server #1 will have 2 Internal SCSI drives in a RAID 1 configuration.
> > > > Server #2 will have 3 Internal SCSI drives in a RAID 5 configuration.
> > > > Server #3 will have 2 Internal SCSI drives and 6 External SCSI drives
> > > configured into 4 mirrored pairs - RAID 1
> > > > This last server will use RedHat 7.1 (2.4.18-17-smp)
> > > >
> > > > I need someone to point me to a place where I can get info for setting
> > > > up
> > > the RAID configuration for these 3 servers.
> > > >
> > > > Anyone....anyone??
> > > > Thanks,
> > > > Cleve
> > > >
> > > >
> > > > _______________________________________________
> > > > General mailing list
> > > > [email protected]
> > > > http://oxygen.nocdirect.com/mailman/listinfo/general_brlug.net
> > >
> > >
> > > _______________________________________________
> > > General mailing list
> > > [email protected]
> > > http://oxygen.nocdirect.com/mailman/listinfo/general_brlug.net
> > >
> >
> >
> >_______________________________________________
> >General mailing list
> >[email protected]
> >http://oxygen.nocdirect.com/mailman/listinfo/general_brlug.net
>
>
> ---
> Dustin Puryear <[EMAIL PROTECTED]>
> Puryear Information Technology
> Windows, UNIX, and IT Consulting
> http://www.puryear-it.com
>
>
>
> _______________________________________________
> General mailing list
> [email protected]
> http://oxygen.nocdirect.com/mailman/listinfo/general_brlug.net
>
