Not looking to consolidate - we just need a residential land line once EATEL
pulls out.  I work at home and the exisiting VOIP phone is my desk extension
on my employer's phone system so I have to keep that no matter what.

>From what you said below, the COX installation should work for me.  The
house has standard residential wiring, I just use the block as a
distribution point so I can set up the phones in a star pattern - I hate
series run phone systems - one bad jack and all jacks down stream go out. I
was just unsure if COX used some esoteric VOIP device and it needed to plug
into an ethernet port somewhere, but it sounds like there is an analog line
I can use for what I want.

I also got a reply from someone at COX on DSLReports and they said the eMTA
seperates out the VOIP traffic so the internet traffic and VOIP traffic
don't share bandwidth.

Thanks,

James

> -----Original Message-----
> From: General-bounces at brlug.net 
> [mailto:General-bounces at brlug.net] On Behalf Of Andrew Baudouin
> Sent: Friday, November 11, 2005 1:19 PM
> To: General at brlug.net
> Subject: Re: [brlug-general] Existing VOIP phone and COX 
> Digital Telephone
> 
> James Kuhns wrote:
> 
> >I posted a modified version of this on DSLReports also but was hoping
> >someone here may be able to help me.
> >
> >I currently have HSI and standard cable from COX. I have 
> standard telephone
> >service through EATEL who is pulling out of our market 
> (Lafayette) so I am
> >looking into switching to COX' Digital Telephone.  Just a 
> side note: I've
> >been extremly pleased with EATEL's service, I guess they 
> just don't have
> >enough subscribers in this area, my luck. 
> >  
> >
> Eatel is pulling out of everywhere non-Ascension.  It isn't a # of 
> subscribers based deal.
> 
> >My cable and phone service are both terminated in a wiring 
> closet. The cable
> >is split with one line going to my modem and the rest going 
> to various TVs
> >in the house. My phone service terminates in this closet at 
> a punch down
> >block with lines to each phone jack and one running back to 
> the NID outside.
> >
> >I currently have a VOIP phone connected to a switch behind 
> my cable modem
> >(the switch and modem belong to me, the phone belongs to my 
> employer). I
> >REALLY need to keep this VOIP phone.
> >  
> >
> If you are looking to consolidate services and no longer pay for two 
> telephone services but still use your existing IP phone, you 
> are out of 
> luck.  Cox digital telephone is handled by patching a line from the 
> modem into your home's analog phone wiring.  Your standard 
> analog phones 
> then plug into the wiring, and your modem handles turning all of that 
> information into VOIP.  
> 
> You could still use your existing VOIP phone through the Cox cable 
> internet as you have been however, but I don't think that meets your 
> needs.  (Why do you need two phone services?)   
> 
> >I am unclear how COX handles/installs their phone service. 
> I'm worried about
> >what equipment will be installed over here and if this 
> equipment will work
> >with my current setup - i.e. will I be able to use COX' 
> phone service and
> >keep my existing VOIP phone, will I have enough bandwidth to 
> use both phones
> >simultaneously (COX claims it's a 5/1 connection but I 
> usually see speeds
> >~3.9/.75) - I realize this is probably an "it depends" 
> question (I'm just
> >curious, one at a time will be fine, but both would be great).
> >  
> >
> See above.
> 
>    The bandwidth is fine according to my usage patterns, but if you 
> normally download at the full 4 megabit rate and upload at 
> the full rate 
> and attempt to talk on the phone (I've never actually needed to try 
> that) you may have a problem.  I am not sure how "quality" 
> Cox's QOS is  
> (redundant, I know) .
> 
> >Also, could anyone explain how the physical connections will 
> be setup? Coax
> >to the TV (I'm sure)? Coax to a modem or is the modem "built 
> into" an eMTA with ethernet coming out? Will I be able to 
> patch the COX phone feed to my punch down block in place of 
> the line I currently have going to my NID?
> >  
> >
> It depends on how your home is wired.  Mine is wired in a loopback 
> system with no punchdown block in the attic.  They simply ran a phone 
> line down to my modem and patched it in to the existing system.  You 
> shouldn't have a problem.
> 
> The coax from outside comes into your modem as normal, with 
> an ethernet 
> output to your computers.
> 
> >Any other "gotchas" anyone can think of?
> >
> >Thanks for any help.
> >
> >James
> >
> >
> >_______________________________________________
> >General mailing list
> >General at brlug.net
> >http://brlug.net/mailman/listinfo/general_brlug.net
> >
> >  
> >
> 
> 
> 
> _______________________________________________
> General mailing list
> General at brlug.net
> http://brlug.net/mailman/listinfo/general_brlug.net
> 


Reply via email to