Xavier Andrade wrote:
On Wed, 23 Apr 2008, Roland Dreier wrote:
Hmm, not sure... let's see what the Mellanox guys say (they're mostly on
vacation this week so it might be a few days).
We are back :-)
I can't locate the correct firmware, the PSID reported by mtsflint
corresponds to an Intel one:
Image type: Failsafe
I.S. Version: 1
Chip Revision: A0
Description: Node Port1 Sys image
GUIDs: 0002c9020022baa4 0002c9020022baa5 0002c9020022baa7
Board ID: (INT0010000001)
VSD:
PSID: INT0010000001
But I haven't been able to find any firmware in Intel's webpage.
Do you think that I could use a Mellanox firmware? Which one? There
are three different ones for the MT25204.
Attached is the ini file for this PSID.
Please create a binary using the MFT package in our web site and try to
burn it.
If you have more issues please work with Todd that cc on this maik
Tziporet
[PS_INFO]
Name = D51144
Description = Intel Alcolu versions A1-A3
[ADAPTER]
PSID = INT0010000001
gpio_direction = 0x00FB
gpio_default_val = 0xe3
[HCA]
[IB]
;;;;; SDR Serdes Configuration
port1_sd0_OBPreAmp = 0x1
port1_sd1_OBPreAmp = 0x1
port1_sd2_OBPreAmp = 0x1
port1_sd3_OBPreAmp = 0x1
port1_sd0_OBVoltage = 0x1
port1_sd1_OBVoltage = 0x1
port1_sd2_OBVoltage = 0x1
port1_sd3_OBVoltage = 0x1
port1_sd0_OBPreEmpPreAmp = 0x1
port1_sd1_OBPreEmpPreAmp = 0x1
port1_sd2_OBPreEmpPreAmp = 0x1
port1_sd3_OBPreEmpPreAmp = 0x1
port1_sd0_OBPreEmpOut = 0x1
port1_sd1_OBPreEmpOut = 0x1
port1_sd2_OBPreEmpOut = 0x1
port1_sd3_OBPreEmpOut = 0x1
port1_sd0_Equal = 0x6
port1_sd1_Equal = 0x6
port1_sd2_Equal = 0x6
port1_sd3_Equal = 0x6
[PLL]
[FW]
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
