The same operation is performed when the Ethernet driver initializes the port. If the SET_PORT command is being performed without INIT_PORT command that follows it, the link sensing fsm is found in a bad state. Removing the command from the mlx4_core ensures this situation never happens.
Signed-off-by: Yevgeny Petrilin <[email protected]> --- drivers/net/mlx4/port.c | 13 +++++-------- 1 files changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c index 0a057e5..7cce334 100644 --- a/drivers/net/mlx4/port.c +++ b/drivers/net/mlx4/port.c @@ -298,20 +298,17 @@ int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) { struct mlx4_cmd_mailbox *mailbox; int err; - u8 is_eth = dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH; mailbox = mlx4_alloc_cmd_mailbox(dev); if (IS_ERR(mailbox)) return PTR_ERR(mailbox); memset(mailbox->buf, 0, 256); - if (is_eth) { - ((u8 *) mailbox->buf)[3] = 6; - ((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15); - ((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15); - } else - ((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port]; - err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT, + if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH) + return 0; + + ((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port]; + err = mlx4_cmd(dev, mailbox->dma, port, 0, MLX4_CMD_SET_PORT, MLX4_CMD_TIME_CLASS_B); mlx4_free_cmd_mailbox(dev, mailbox); -- 1.6.1.3 _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
