Hi Jezra,
I faced the same problem as you.
So lthor didn't detect my lunchbox running tizen 2.0.0a.
Please try below steps. This resolved my issue.
1. boot lunchbox
2. connect to host via usb cable
at this time, you can see following vendor/product id by lsusb on host.
04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone ...
3. on lunchbox, go to setting > all > developer option > usb debugging mode and
set it to on.
You can see vendor/product id changed by lsusb on host
04e8:6863 Samsung Electronics Co., Ltd
4. power-off lunchbox while *CONNECTING* usb cable to host. DON'T DISCONNECT.
5. after power-off, disconnect usb cable.
6. boot lunchbox into download mode by pressing <volume down>+<power> keys.
7. connect usb cable.
Now you can see vendor/product id showed by lsusb on host
04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone ...
8. do lthor
Thanks,
Yoon
-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of jezra
Sent: Tuesday, February 19, 2013 2:41 AM
To: [email protected]
Subject: [Tizen General] repository configuration
Hello,
I have a Lunchbox device running Tizen 2.0.0a that is no longer recognized by
lthor and I am unable to flash new images to the device.
Is there a working repository that I can configure zypper to use so that I can
update my device to the latest version of Tizen without requiring lthor?
Jezra
Web: http://www.jezra.net
Status: http://status.jezra.net
Coffee: http://coffee.jezra.net
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
