sdb is working as long as I wait for the lunchbox to fully boot before connecting with USB. In the morning, I will see what I can do about running sshd at start up.
On Mon, 25 Feb 2013 01:19:19 +0000 "Yoon, Youngsik" <[email protected]> wrote: > I didn't try ssh but I remember I could use sdb. > $ sdb -d shell > > Thanks, > Yoon > > -----Original Message----- > From: jezra [mailto:[email protected]] > Sent: Sunday, February 24, 2013 5:27 AM > To: Yoon, Youngsik > Cc: [email protected] > Subject: Re: [Tizen General] repository configuration > > By following the instructions, I was able to flash a new image to my > Lunchbox. Unfortunately, I am now unable to ssh to the TRATS device. > > On Fri, 22 Feb 2013 08:51:29 +0000 > "Yoon, Youngsik" <[email protected]> wrote: > > > Hi Jezra, > > > > I faced the same problem as you. > > So lthor didn't detect my lunchbox running tizen 2.0.0a. > > > > Please try below steps. This resolved my issue. > > 1. boot lunchbox > > > > 2. connect to host via usb cable > > at this time, you can see following vendor/product id by > > lsusb on host. 04e8:6860 Samsung Electronics Co., Ltd GT-I9100 > > Phone ... > > > > 3. on lunchbox, go to setting > all > developer option > usb > > debugging mode and set it to on. You can see vendor/product id > > changed by lsusb on host 04e8:6863 Samsung Electronics Co., Ltd > > > > 4. power-off lunchbox while *CONNECTING* usb cable to host. DON'T > > DISCONNECT. > > > > 5. after power-off, disconnect usb cable. > > > > 6. boot lunchbox into download mode by pressing <volume > > down>+<power> keys. > > > > 7. connect usb cable. > > Now you can see vendor/product id showed by lsusb on host > > 04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone ... > > > > 8. do lthor > > > > Thanks, > > Yoon > > > > > > -----Original Message----- > > From: [email protected] > > [mailto:[email protected]] On Behalf Of jezra Sent: > > Tuesday, February 19, 2013 2:41 AM To: [email protected] > > Subject: [Tizen General] repository configuration > > > > Hello, > > I have a Lunchbox device running Tizen 2.0.0a that is no longer > > recognized by lthor and I am unable to flash new images to the > > device. Is there a working repository that I can configure zypper > > to use so that I can update my device to the latest version of > > Tizen without requiring lthor? > > > > Jezra > > > > Web: http://www.jezra.net > > Status: http://status.jezra.net > > Coffee: http://coffee.jezra.net > > _______________________________________________ > > General mailing list > > [email protected] > > https://lists.tizen.org/listinfo/general > _______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
