Greetings,
> I have been trying ( with out much luck ) to network my Amiga 1200 & PC via
> a c-net pcmcia card ( Amiga ) and
> the internal network card on the PC .
I have this setup, and it work fine on two computers.
> >From the amount of info ( i have read - docs etc. )& help from other lists
> it should be working .......................
Yes
> can I ask you guys if any one with a working pcmcia card on thier Amiga
> could check out my settings please .
I will do.
Your settings seems to be okay. It seems that the sana-device could
not get the hardware-address of your PCMCIA-card.
There are some possibilities for that, i think:
1. your card is not compatible with cnet.device
2. you use not the latest cnet.device from AmiNET (>=V1.6).
3. Remeber, that the PCMCIA-Card isn't properly reset on a reboot. So
you have to do one of the following:
a) make a small change to the mainboard (doc in the cnet-archive)
b) buy a additional hardware that fix this (does the same as a) )
c) remove the card for a few seconds after a reboot (try this first)
What type and manufacturer is your card ?
If you have additional questions, contact me.
regards Juergen
--
----------------------------------------------------------------------
Juergen Sachs PGP-key on request
e-mail : [EMAIL PROTECTED] ICQ: 55491433
http://www.t-online.de/home/juergen-sachs
A4000/040/40/882/40/100MB/4.5Gig *Only AMIGA makes it possible*
----------------------------------------------------------------------
____________________________________________________________
Genesis Mailing List - Info & Archive: http://www.vapor.com/
For Listserver Help: <[EMAIL PROTECTED]>, "HELP"
To Unsubscribe: <[EMAIL PROTECTED]>, "UNSUBSCRIBE"
