Hi
> Greetings, >> I have been trying ( with out much luck ) to network my Amiga 1200 & PC >> via a c-net pcmcia card ( Amiga ) and the internal network card on the PC >> . > I have this setup, and it work fine on two computers. >> > From the amount of info ( i have read - docs etc. )& help from other >> > lists >> it should be working ....................... > Yes >> can I ask you guys if any one with a working pcmcia card on thier Amiga >> could check out my settings please . > I will do. > Your settings seems to be okay. It seems that the sana-device could > not get the hardware-address of your PCMCIA-card. > > There are some possibilities for that, i think: > 1. your card is not compatible with cnet.device It was from a known Amiga user who had it working ok > 2. you use not the latest cnet.device from AmiNET (>=V1.6). just checked the V its 1.6 > 3. Remeber, that the PCMCIA-Card isn't properly reset on a reboot. So > you have to do one of the following: > a) make a small change to the mainboard (doc in the cnet-archive) > b) buy a additional hardware that fix this (does the same as a) ) I have this mod fitted > c) remove the card for a few seconds after a reboot (try this first) > > What type and manufacturer is your card ? Power NIC CNet pcmcia > > If you have additional questions, contact me. Thanks -- Ralph [EMAIL PROTECTED] http://www.twiss.org I have made this letter longer than usual because I lack the time to make it shorter. -- Blaise Pascal ____________________________________________________________ Genesis Mailing List - Info & Archive: http://www.vapor.com/ For Listserver Help: <[EMAIL PROTECTED]>, "HELP" To Unsubscribe: <[EMAIL PROTECTED]>, "UNSUBSCRIBE"
