I just figured that out yesterday, but I also added an "ip dst" match as well. I guess the src is more important though, due to limited upload speeds.
Is there ever any end to learning Linux? I hope not. On Wed, 2003-06-04 at 10:47, Patrick Nehls wrote: > If you are using the default wondershaper script then I believe it > prioritizes all traffic into 2 main queues. One is the high priority queue > and the other is the "bulk" or lower priority queue. The simple solution is > to dump all traffic coming from the single high priority host into the high > priority queue, and then dump everything else into the bulk queue. > > You would prioritize traffic from a single host like this: > tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 match ip src > 192.168.50.50/32 flowid 1:10 > Where 1:10 is the high priority queue. > > Patrick > > -----Original Message----- > From: Spider [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 04, 2003 8:37 AM > To: [EMAIL PROTECTED] > Subject: Re: [gentoo-user] traffic shaping question > > > begin quote > On 03 Jun 2003 13:12:54 -0500 > Shawn <[EMAIL PROTECTED]> wrote: > > > I have a variation of the wondershaper script, but I'm not sure that I > > know how to make it do what I want it to do... which is: > > > > prioritize traffic from a particular host for which my gentoo linux > > box is a router. > > > > Is anyone here a guru? > > > not a guru, but I did some reading.. > > you can use the iptables MARK rule to tag all packages from that host, then > use CBQ to prioritize those packets above others..... > > > there might be some tc rules that you can use pre default, but its been a > few years since I last read through the documentation (should be a nice .pdf > in the documentation part for the package...) > > > //Spider > -- [EMAIL PROTECTED] mailing list
