See that is another thing that confused me I used the memtest86 and let it run overnight, no errors were found. However I am still suspecting the ram, the person that had the moboard and processor before me ran it fine with no errors using different ram.
-----Original Message----- From: Jon Gaudette [mailto:[EMAIL PROTECTED] Sent: Friday, June 27, 2003 9:32 AM To: Gentoo User List Subject: RE: [gentoo-user] Confused I believe that the installation CD's come with memtest86. If rc3/rc2 does not work for you, you may want to use that overnight to check your ram. -Jon "GenKiller" Gaudette http://www.digital-drip.com On Fri, 2003-06-27 at 09:17, Tracy LCpl Derek E wrote: > That is what I thought also (optimizations) but I turned all of them off and > still had the same thing happen just in a different place. I am actually > starting to lean towards the ram the more I dig into it but I am going to > try rc3 and rc2 tonight to see what happens (thankfully I still have the > receipt for the ram), I am also going to try to switch out the ram (one of > my friends has two other sticks to try. Again thank you all for your help, > I am completely Winblows free at home and am attempting to change over my > workplace (I work for the Marine Corps so this might be in vain). > Thankfully I am the network administrator for 7 unix servers (HP-UX) so I am > not surrounded by the Microsoft veil the entire day. > > -----Original Message----- > From: Chris Bare [mailto:[EMAIL PROTECTED] > Sent: Friday, June 27, 2003 9:07 AM > To: [EMAIL PROTECTED] > Subject: Re: [gentoo-user] Confused > > > > Is there any particular version that you would recommend I am using rc4 do > > you think that rc2 or rc3 would be better? > > I don't know what to suggest, but I used rc4 on a similar setup. I have > an asus a7v mobo which also has the kt333 chipset. Have you turned up > the optimization yet? That could cause seg faults in things you have > built if the compiler optimization is buggy. -- [EMAIL PROTECTED] mailing list
