On Tuesday 22 July 2003 09:27, Paul Colquhoun wrote: <snip> > I have this MB (or the MP2450, I can't find the manual at the moment so > I am not sure). > > I'm fairly certain that my MB does not have the sensor hardware, as it > was the low-end model in the range. > > Higher priced models included more devices on the MB (Ethernet, etc) and > somewhere along the line the sensors get added. I know there are a few > blank areas on my MB where this extra hardware would fit, if it was > installed.
There are sensors and some software (Win and Linux) available for download from their web site. Could anyone with a similar board and 2 MP 2400's check their output with my own? -= Copyright(c) 2001-2003 Tyan Computer Corporation =- -= =- -= Hardware Monitoring Utility 1.0 =- -= for S2462 =- Loop #164 CPU1 Fan = 0.000 cyc/s CPU2 Fan = 0.000 cyc/s Chassis Fan 1 = 0.000 cyc/s Chassis Fan 2 = 70.000 cyc/s Chassis Fan 5 = 71.000 cyc/s Chassis Fan 6 = 0.000 cyc/s CPU1 Core Volt = 1.616 Volt CPU2 Core Volt = 1.616 Volt System Volt 3.3V = 3.216 Volt System Volt 5V = 4.492 Volt System Volt 12V = 12.936 Volt System Volt -12V = -12.850 Volt AGP Volt = 1.536 Volt DDR Volt = 1.232 Volt Battery Volt = 3.264 Volt Standby 3.3V = 3.296 Volt CPU1 Temp = 48.000 C degree CPU2 Temp = 61.000 C degree VRM1 Temp = 49.000 C degree VRM2 Temp = 57.000 C degree DDR Temp = 43.000 C degree AGP Temp = 52.000 C degree My system keeps freezing on me, and I am not sure why. -- Tom Wesley
pgp00000.pgp
Description: signature
