Hi all..
First post to the list for me.. I must say I really love Gentoo :)
But I have a problem. At work we have a Compaq DL360 with two 36,4 gb
scsi discs. They are both set up as 1 drive. So I have just
over 70 gb in total.
The cpqarray module is loaded. And in /dev I can find the disk as /dev/ida/disc0/disc
I use "fdisk /dev/ida/disc0/disc" and set up my partionions.
Everything works fine. When I'm finnished I have this :
Disk /dev/ida/disc0/disc: 72.8 GB, 72829501440 bytes
255 heads, 32 sectors/track, 17432 cylinders
Units = cylinders of 8160 * 512 = 4177920 bytes
Device Boot Start End Blocks Id System
/dev/ida/disc0/part1 1 13 53024 83 Linux
/dev/ida/disc0/part2 14 493 1958400 82 Linux swap
/dev/ida/disc0/part3 494 17432 69111120 83 Linux
Command (m for help):
I format the partions and activate the swap and mount them.
I extract stage 1 and mounts proc and does "chroot /mnt/gentoo /bin/bash"
But here it goes wrong, For instance I'm not able to do : df
It says : df: cannot read table of mounted filesystems: No such file or directory
In /dev I can't find ida/disc0/disc
I only have /dev not /dev/ida
What happend? I've tried to download stage 1 from antoher place. After
that I have /dev/ida but not /dev/ida/disc0/
Is there a workaround for this, have I done something wrong?.. I have
installed Gentoo many times. But it's the first time I've tried to install it
on a Compaq DL360.
Thanks..
--
Best regards,
Roar mailto:[EMAIL PROTECTED]
--
[EMAIL PROTECTED] mailing list
