Marshal
I have gotten the info for the pcmcia card that you asked for the the other night, It
is as follows:
[EMAIL PROTECTED] lshw-A.01.03 # lshw -short
H/W path Device Class Description
=========================================================
system Computer
/0 bus Motherboard
/0/0 memory BIOS
/0/400 processor CPU
/0/400/700 memory L1 cache
/0/400/701 memory L2 cache
/0/1000 memory System Memory
/0/1000/0 memory DIMM DRAM Synchronous
/0/1000/1 memory DIMM DRAM Synchronous
/0/f4000000 bridge
/0/f4000000/1 bridge
/0/f4000000/1/0 display
/0/f4000000/3 bridge
/0/f4000000/3.1 bridge
/0/f4000000/3.1/0 communication CreditCard Ethernet 10/100 + Modem 56
/0/f4000000/7 bridge
/0/f4000000/7.1 storage
/0/f4000000/7.1/0 ide0 bus Channel 0
/0/f4000000/7.1/0/0 /dev/hda disk ATA Disk
/0/f4000000/7.1/1 ide1 bus Channel 1
/0/f4000000/7.1/1/0 /dev/hdc disk ATA Disk
/0/f4000000/7.2 bus
/0/f4000000/7.3 bridge
/0/f4000000/8 multimedia
[EMAIL PROTECTED] lshw-A.01.03 #
[EMAIL PROTECTED] lshw-A.01.03 # dmesg | more
Linux version 2.4.20-gentoo-r5 ([EMAIL PROTECTED]) (gcc version 3.2.3
20030422 (Gentoo Linux 1.4 3.2.3-r1
, propolice)) #1 Fri Aug 8 07:31:30 Local time zone must be set--see zic
manua
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffec000 (usable)
BIOS-e820: 000000000ffec000 - 000000000fff0000 (reserved)
BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65516
zone(0): 4096 pages.
zone(1): 61420 pages.
zone(2): 0 pages.
Dell Latitude with broken BIOS detected. Refusing to enable the local
APIC.
Kernel command line: root=/dev/hda3 hdd=ide-sci
ide_setup: hdd=ide-sci
Initializing CPU#0
Detected 647.212 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1291.05 BogoMIPS
Memory: 252856k/262064k available (2308k kernel code, 6776k reserved,
-2640k data, 136k init, 0k hig
hmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Proc Config support by [EMAIL PROTECTED]
proc config counted 2363 bytes in names
proc config counted 288 bytes in value handles
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfc0be, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
NTFS driver 2.1.4a [Flags: R/O].
pty: 256 Unix98 ptys configured
i8k: unable to get SMM Dell signature
i8k: unable to get SMM BIOS version
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS03 at 0x02e8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MHK2120AT, ATA DISK drive
hdc: SAMSUNG CD-ROM SCR-2438, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0180764, I/O limit 4095Mb (mask 0xffffffff)
hda: 23579136 sectors (12073 MB) w/512KiB Cache, CHS=1467/255/63,
UDMA(33)
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0:<7>ldm_validate_partition_table():
Found an MS-DOS partition table
, not a dynamic disk.
p1 p2 p3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xf4000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Intel 440BX @ 0xf4000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm] AGP 0.99 on Intel 440BX @ 0xf4000000 64MB
[drm] Initialized i810 1.2.0 20010920 on minor 2
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: No ISAPnP cards found, trying standard ones...
sb: I/O, IRQ, and DMA are mandatory
maestro3: version 1.23 built at 07:35:55 Aug 8 2003
PCI: Found IRQ 5 for device 00:08.0
maestro3: Configuring ESS Maestro3(i) found at IO 0xD800 IRQ 5
maestro3: subvendor id: 0x00bb1028
ac97_codec: AC97 Audio codec, id: ��v9(SigmaTel STAC9721/23)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:03.0
PCI: Sharing IRQ 11 with 00:03.1
PCI: Sharing IRQ 11 with 00:07.2
PCI: Found IRQ 11 for device 00:03.1
PCI: Sharing IRQ 11 with 00:03.0
PCI: Sharing IRQ 11 with 00:07.2
usb.c: registered new driver hub
Yenta IRQ list 0698, PCI irq11
Socket status: 30000006
Yenta IRQ list 0698, PCI irq11
Socket status: 30000010
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 11 for device 00:07.2
PCI: Sharing IRQ 11 with 00:03.0
PCI: Sharing IRQ 11 with 00:03.1
uhci.c: USB UHCI at I/O 0xdce0, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
systrace: systrace initialized
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
reiserfs: checking transaction log (device 03:03) ...
Warning, log replay starting on readonly filesystem
reiserfs: replayed 1 transactions in 2 seconds
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Adding Swap: 369484k swap-space (priority -1)
Removing [1981 515709 0x0 SD]..done
Removing [1981 515708 0x0 SD]..done
There were 2 uncompleted unlinks/truncates. Completed
end_request: I/O error, cmd 0 dev 02:00 (floppy), sector 0
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x300-0x307 0x378-0x37f
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
VFS: Can't find ext2 filesystem on dev fd(2,0).
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04
hdc: lost interrupt
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04
hdc: lost interrupt
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04
hdc: lost interrupt
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04
hdc: lost interrupt
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04
hdc: lost interrupt
[EMAIL PROTECTED] lsh
1. pcmcia is loaded and unloaded
2. I can unplug & replug and get notification with beeps.
3. All /etc files seem to be correct
4. kernel selinux 2.4.20 r4 original build from install 3 months ago
5. Dell Latitude CPx 650 laptop, system was fully functional up till a week or so.
Any more info on request.if you wish to post offline use [EMAIL PROTECTED]
Your help is appreciated
cheers
--
Rick Sivernell
Dallas, Texas 75287
972 306-2296
[EMAIL PROTECTED]
Gentoo Linux
Registered Linux User
.~.
/ v \
/( _ )\
^ ^
In Linux we trust!
--
[EMAIL PROTECTED] mailing list
