Thanks for your support Mark! I hope i can manage it with your help. I did the above, the result is similar, still the (EE) LoadModule: Module radeon does not have a radeonModuleData data object. problem. I guess it's not the guilt of the XF86Config. No idea what to do :( But i will have a closer look now, i comment this on my site.
cheers, Florian
OK then, let's go back to basics and find the problem:
1) Since you built a new kernel yesterday, please provide the output of 'uname -a' so we can double check that it got loaded.
2) Provide the output of lsmod so we can see what modules are loaded. If you have the wrong radeon module (I.e. - no 3D acceleration) then this problem could happen.
3) If, by chance, the radeon module isn't loaded at all, then what happens when you do 'modprobe radeon'?
4) 'emerge epm' if you don't have it and provide the output of 'epm -qa | grep xfr'
5) Provide the output of lspci.
6) In /etc/X11/XF86Config, please make sure you have enabled "dbe", "glx" & "dri", and that you are also loading
Driver "radeon"
in the "Device" Section. Maybe you have the wrong driver name there.
FYI - You will also need to go to the Section "DRI" are and uncomment Mode 0666.
Enough for now, Mark
I did everything, here are the results:
1,2,4,5: see http://openspirit.de/noowiki/flok/Groovesurfer
3 the readeon module loads 6: Ok, enabled glx and dri; the rest was already fine 7: Section DRI was fine
I put the XF86Config also on the site, should have done that earlier.
BTW: for other readers and googlers: documented on http://openspirit.de/noowiki/flok/GroovesurferXFreeRadeonProblem
Bye for now, Florian
-- [EMAIL PROTECTED] mailing list
