> > I did everything, here are the results: > > 1,2,4,5: see http://openspirit.de/noowiki/flok/Groovesurfer > > 3 the readeon module loads > 6: Ok, enabled glx and dri; the rest was already fine > 7: Section DRI was fine > > I put the XF86Config also on the site, should have done that earlier. > > > BTW: for other readers and googlers: documented on > http://openspirit.de/noowiki/flok/GroovesurferXFreeRadeonProblem > > > Bye for now, > Florian
If you were able to modprobe radeon and then see it with lsmod, then I am no longer clear what the problem is. If you run glxgears and get something above 200fps (I get about 1760fps on the 800MHz Athlon I have here in the office with a Radeon 7500) then everything is working. If you still get low frame rates then there is a problem that I don't understand. Wait! I do not see agpgart in your lsmod listing. Please turn that on in make xconfig under Character devices. Or is it turned on but built into the kernel? If so, then please make it a module, not built in. (I think I read this somewhere...anyway, if you make it modular then you can see that it's loaded.) - Mark -- [EMAIL PROTECTED] mailing list
