On Thursday 25 September 2003 07:57 pm, Ben Anderson wrote:
> I couldn't get grub configured to boot my windows, so I tried lilo, but
> still w/out success. Here's from the lilo.conf
>
> other = /dev/hda1
> label = WindowsXP
> table = /dev/hda
>
> I have 2 hard drives. The first one has XP and the second Gentoo. I
> installed Lilo on the MBR of the first. The menu comes up, but when I
> select WindowsXP, it just hangs.
> THanks,
> Ben Anderson
>
> _________________________________________________________________
> Share your photos without swamping your Inbox. Get Hotmail Extra Storage
> today! http://join.msn.com/?PAGE=features/es
>
>
> --
> [EMAIL PROTECTED] mailing list
--
Chris
[EMAIL PROTECTED]
# $Header: /home/cvsroot/gentoo-x86/sys-apps/lilo/files/lilo.conf,v 1.4 2003/07/17
21:10:26 azarah Exp $
# Author: Ultanium
#
# Start LILO global section
#
# Faster, but won't work on all systems:
#compact
# Should work for most systems, and do not have the sector limit:
lba32
# If lba32 do not work, use linear:
#linear
# MBR to install LILO to:
boot = /dev/hda
map = /boot/.map
# If you are having problems booting from a hardware raid-array
# or have a unusual setup, try this:
#disk=/dev/ataraid/disc0/disc bios=0x80 # see this as the first BIOS disk
#disk=/dev/sda bios=0x81 # see this as the second BIOS disk
#disk=/dev/hda bios=0x82 # see this as the third BIOS disk
# Here you can select the secondary loader to install. A few
# examples is:
#
# boot-text.b
# boot-menu.b
# boot-bmp.b
#
install = /boot/boot-menu.b # Note that for lilo-22.5.5 or later you
# do not need boot-{text,menu,bmp}.b in
# /boot, as they are linked into the lilo
# binary.
menu-scheme=Wb
prompt
# If you always want to see the prompt with a 15 second timeout:
timeout=150
#delay = 50
# Normal VGA console
#vga = normal
# VESA console with size 1024x768x16:
vga = 791
#
# End LILO global section
#
#
# Linux bootable partition config begins
#
image = /boot/kernel2
root = /dev/hdb3
#root = /devices/discs/disc0/part3
label = Gentoo
read-only # read-only for checking
image = /boot/kernel-2.4.20-gaming-r3
root = /dev/hdb3
#root = /devices/discs/disc0/part3
label = Gentoo2
read-only # read-only for checking
#
# Linux bootable partition config ends
#
#
# DOS bootable partition config begins
#
other = /dev/hda1
#other = /devices/discs/disc0/part1
label = WindowsXP
table = /dev/hda
#
# DOS bootable partition config ends
#
--
[EMAIL PROTECTED] mailing list
