I have a problem using my 20inch monitor with a resolution of 1400x1050 pixels. It's a Sony GDM-4011P which is a little old but in Windows I got it up to 1400x1050 at 85Hz using a tool named Powerstrip.
Now I want to use this monitor on my Gentoo machine. For I don't know any other tuning tool like Sax2 from the SuSE-distribution, I installed that distribution on another harddrive and was _successful_ in generating a XF86Config-file with Sax2 that contains modelines for 1400x1050-resolution at 81Hz (higher values produce some distortion on the left hand side of the screen).
So I copied the nessessary lines from that Sax2-XF86Config-file to my XF86Config-file I had built in Gentoo, such as the modelines, the device section, and the screen section.
But in the end I can only run at maximum a 1280x1024 resolution, which is not even 4:3 format. Well, it runs at 85Hz, but I want the bigger resolution I had so much trouble with in configuring.
I tried many combinations of commenting out lines in XF86Config. Even if I only allow one resolution (1400x...) in the screen section the server runs at 1280x1024! Other attempts I made were to configure a virtual resolution, but it never runs at 1400x...!
Why is that so? What kind of behaviour is that? Using Sax2 I can test it all and even the installed windowmaker of that SuSE8.1-distribution runs at 1400x1050. What is missing in my modified XF86Config?
Do the loaded font modules have anything to do with that (thats the only remarkable difference between the two XF86Config-files)?
Oh and btw.: I use a GeForce2 Ti, which should be able to produce frequencies high enough. I recently installed this card because my Voodoo3 3000 did go at maximum 1400x1050 at 70Hz using Sax2.
My GeForce2 Ti only has a problem with 3D-functionality - it crashes when running for example glxgears. I noticed that behaviour long before when I used that card on my Windows machine. But 2D-stuff was never a problem. And since I don't intend to play games on my Gentoo machine I'm fine with that.
Big thanks for help, Frank.
PS: Is there any other configuration tool like Sax2, which is available for Gentoo? (I don't mean such things like xvidtune.)
-- [EMAIL PROTECTED] mailing list
