hi are you sure with hde (the letter E) ? this whould be your fifth IDE-Drive, have you got a raid-adapter or something? if you have a hde, can it be, that grub use hd0 for this drive?
I don't know exactly, but if you want to load a kernel with grub, you have to give hin the right command: grub> kernel /boot/kernel-2.4.20-gentoo-r7 I think you have to perform a the command root before you load the kernel And then you can try boot but i'm not sure joe On Saturday 11 October 2003 17:17, Stephen Liu wrote: > Hi all folks, > > I just finished installation of Gentoo-Linux1.4 On booting the new > system it prompted > > *************** > Booting 'My example Gentoo Linux (genkernel)' > Filessytem type is ext2fs, partition type 0x83 > kernel (hd0,0)/boot/kernel-KV root=/dev/hde3 > > Error 15: File not found > *************** > > My new system > =========== > Root hde3 (Reiserfs) > Boot hde1 (Ext3) > Swap hde2 > > Booted with bootdiskette > ================= > Grub loading Stage2 > grub> > > I tried following commands without success > grub> boot > Error 8: Kernel must be loaded before booting > > grub> /boot/kernel-2.4.20-gentoo-r7 > Error 27: Unrecognized command > etc. > > Kindly advise how to proceed. Thanks in advance. > > B.R. > Stephen Liu > > > -- > [EMAIL PROTECTED] mailing list -- [EMAIL PROTECTED] mailing list
