Re: [gentoo-user] Problem on booting after installation.

[Stephen Liu]

Hi Joe,

Thanks for your response

Joe Stone wrote:

Are you sure with hde (the letter E) ?
this whould be your fifth IDE-Drive, have you got a raid-adapter or something?
if you have a hde, can it be, that grub use hd0 for this drive?
 

Yes.  The HD is connected to raid-adapter.

I don't know exactly, but if you want to load a kernel with grub, you have to 
give hin the right command:

grub> kernel /boot/kernel-2.4.20-gentoo-r7
I think you have to perform a the command root before you load the kernel
And then you can try boot
but i'm not sure
 

Whether you meant on Code listing 23.1
# emerge -k grub
# grub
I have to type
grub> kernel /boot/kernel-2.4.20-gentoo-r7
B.R.
Stephen
On Saturday 11 October 2003 17:17, Stephen Liu wrote:
 

Hi all folks,

I just finished installation of Gentoo-Linux1.4   On booting the new
system it prompted
***************
Booting 'My example Gentoo Linux (genkernel)'
Filessytem type is ext2fs, partition type 0x83
kernel (hd0,0)/boot/kernel-KV root=/dev/hde3
Error 15: File not found
***************
My new system
===========
Root   hde3 (Reiserfs)
Boot   hde1 (Ext3)
Swap   hde2
Booted with bootdiskette
=================
Grub loading Stage2
grub>
I tried following commands without success
grub> boot
Error 8: Kernel must be loaded before booting
grub> /boot/kernel-2.4.20-gentoo-r7
Error 27: Unrecognized command
etc.
Kindly advise how to proceed.  Thanks in advance.

B.R.
Stephen Liu
--
[EMAIL PROTECTED] mailing list
   



--
[EMAIL PROTECTED] mailing list
 



--
[EMAIL PROTECTED] mailing list