did you run "sensors -s" between config file changes? I have seen some boards where the bus locked when playing with strange configurations too much. Result was an unchanging temp and/or fan readings.
My athlon t-bird locks hard at ~60c, but generally runs at 40-55c depending on ambient/load. BillK On Mon, 2003-11-17 at 04:09, Andrew Gaffney wrote: > Joe Stone wrote: > > hi ! > > I have a dual Athlon MP 2200+ boxed with a Tyan Tiger MPX and the HSF from the > > box. > > > > Tyan provides a file for lm-sensors (doesn't work with me, always constant > > temp) > > > > Tyan also has a System Monitor (console and gui) > > (http://www.tyan.com/support/html/software_utilities.html) > > This one works for me and show's the same temperatures as in the BIOS. > > Under full work CPU1 get 48C and CPU2 (blocked by AGP-Graphiccard) up to 50�C. > > If CPU2 reached 53C my box reboots :-( It's time for water-cooling. > > > > What's your board? > > I've got an MSI K7DMaster. I've also got the HSF from the original packaging for the > MP's. -- William Kenworthy <[EMAIL PROTECTED]> -- [EMAIL PROTECTED] mailing list
