You could try flashing the bios of the card to the corresponding pc version. Other than that the cards SHOULD be the same, obviously though, flashing the bios of a graphics card can be dangerous, and I can't guarantee it'll work.
Joel. On Tue, 2003-11-18 at 22:00, Andrew Gaffney wrote: > I pulled the following card from my PowerMac: > > pci bus 0x0000 cardnum 0x0a function 0x00: vendor 0x1002 device 0x4754 > ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] > CardVendor 0x0000 card 0x0000 > STATUS 0x0280 COMMAND 0x0080 > CLASS 0x03 0x00 0x00 REVISION 0x41 > BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08 > APBASE 0xda000000 addr 0xda000000 > BLOCKIO 0x0000bc01 addr 0x0000bc00 > REGBASE 0xdc000000 addr 0xdc000000 > MAX_LAT 0x00 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b > > Since I don't have the space to setup my Mac anymore, I'm stealing the video card > from it > to use in my x86 box for a dual-head setup. The problem is that whenever X tries to > configure it, I get the error: > > (EE) ATI(0): Cannot read V_BIOS > > Does this mean that the card does not work or that it is just not compatible with > anything > other than a Mac? -- [EMAIL PROTECTED] mailing list
