On Thursday 27 November 2003 10:38 am, Collins Richey wrote:
> On Thu, 27 Nov 2003 17:19:39 +0200 (IST) Scharf Yuval
> <[EMAIL PROTECTED]>
>
> wrote:
> > Hello,
> >
> > For dozens of hours I tried to make the ens1371 in my old Compaq computer
> > in my university produce any sound with no luck.
> >
> > I used red-had 8, Gentoo with 2.4 kernel, Gentoo with 2.6 kerenl.
> > I tried amazingly many combinations. It didn't work.
> > As much as I could have seen the computer was playning sounds, I just
> > didn't hear any sounds.
> >
> > I should mention that Windows had no problem at all.
> >
> > Today I tried to play a CD but it didn't work. I became very suspicious,
> > playing a CD has very little to do with the OS.
> >
> > So I took two speakers, connected to the soundcard and booted to Windows.
> > Windows kept using the internal speaker.
> >
> > I booted to Linux, and EVERYTHING worked great with the external
> > speakers. :-)
> >
> > So, Windows uses only the internal speaker and Linux uses only the
> > external speakers.
> >
> > Can someone explain to me what is going on. Usually in computers, if
> > there are no external speakers the internal speaker works and when you
> > plug in the the external speakers they start to work. Is it a hardware
> > feature or a software feature. Can I control which speakers will be use.
>
> Maybe you have the same problem as I do.  My gentoo system uses devfs. 
> When I load the alsa ens1371 module (modprobe ens1371), the soundcard
> clicks, but no /dev/dsp ... device entries are created.  I have to 'rmmod
> ens1371' then 'modprobe ens1371' a second time to get it to work.  No
> response from gentooers or the alsa mailing list about this problem.  It
> could even be a devfsd problem.
>
> So I just add the following to local.start
>
> modprobe ens1371
> rmmod ens1371
> modprobe ens1371
> play <something youlike>&
>
> Also, the OSS module for my card works without a hitch.
>
> HTH.
Well, I can't solve your problem, but I use the 1371 and have no problem. 
So it is possible.  
-- 
Jim


--
[EMAIL PROTECTED] mailing list

Reply via email to