hi all, thanks to read this message.
I have a little problem due to cupsd installation on my gentoo 1.4, kernel 2.4. I've installed cupsd, foomatic and gim-print. I' ve followed the steps on the gentoo site. I just need to print on the standard parallel port with may hp-deskjet600. Cupsd have also worked, since i have printed a test page. But at startup, at the exact moment that cupsd executable is loaded, i get a list of about 30 messsages like this modprobe: Can't locate module /dev/usb/ttyUSB0 modprobe: Can't locate module /dev/usb/ttyUSB1 modprobe: Can't locate module /dev/usb/ttyUSB2 modprobe: Can't locate module /dev/usb/ttyUSB3 ... up to 15 modprobe: Can't locate module /dev/usblp0 modprobe: Can't locate module /dev/usblp1 modprobe: Can't locate module /dev/usblp2 ... up to 15 and so on. If i stop and start cupsd at the shell i receive the same errors. If i do the same on kne in a terminal, i don't get any message error. Every help or suggestion is really appreciated. Infinite thanks, Angelo Dureghello -- [EMAIL PROTECTED] mailing list
