thx marc, in effects, cups work. But now i really would to avoid thet messages. Maybe is there a way to create that nodes at every boot ?
On Saturday 17 January 2004 14:11, Marc Redmann wrote: > Hi Angelo, > > > modprobe: Can't locate module /dev/usb/ttyUSB0 > > modprobe: Can't locate module /dev/usb/ttyUSB1 > > modprobe: Can't locate module /dev/usb/ttyUSB2 > > modprobe: Can't locate module /dev/usb/ttyUSB3 ... up to 15 > > modprobe: Can't locate module /dev/usblp0 > > modprobe: Can't locate module /dev/usblp1 > > modprobe: Can't locate module /dev/usblp2 ... up to 15 > > and so on. > > It seems that cups is trying to find a usb printer. And your hotplug > service (I think you are running hotplug, aren't you ???) is trying to > load a module for the several devices cupsd is trying to acess, but it > can't be successfull in loading these modules because there are no such > modules. Problem is that I cannot tell you at the moment how to prevent > cupsd from trying to acess usb printers. Maybe you can try googling > after "cups usb" to find some answers. What I can tell you is that these > error messages shouldn't be a problem. Cupsd should start anyway. After > you started the cupsd server just check if the process is running and > continue with the printing guide on gentoo.org e.g. try to print a test > page. > > brgds, Marc > > > > -- > [EMAIL PROTECTED] mailing list -- [EMAIL PROTECTED] mailing list
