On Fri, 2010-10-15 at 22:24 -0400, Jeff Cranmer wrote: > OK, so let's have a go at the ATI drivers again. > > First, get rid of the open source ati drivers > emerge --unmerge -av radeon-ucode xf86-video-ati > > Editing the /etc/make.conf file to change the last line to > VIDEO_CARDS="fglrx" > then running emerge -NDuav system changes the mesa driver so that I have > no valid selections for "VIDEO_CARDS=", so I'll unmerge mesa > > emerge --unmerge -av mesa > > running emerge -NDuav world identified the xorg-drivers and pm-utils > packages that have changed, and attempts to re-emerge mesa, so I'll > unmerge those two > > emerge --unmerge -av xorg-drivers pm-utils > > moving on to the kernel, I verify that I have the correct kernel > parameters: > > Device drivers -> > Graphics Support -> > <*> dev/agpgart (AGP support) > > None of the other modules below the agpgart appear to be appropriate, so > I'll not enable any of these. > > Disable the direct rendering manager and framebuffer support, so this > should take care of the radeon driver module. I'll do a locate search > for this before I reboot. > > > Device Drivers -> > > Generic Driver Options -> > > < > Userspace firmware loading support > > [ ] Include in-kernel firmware blobs in kernel binary > > Recompile the kernel and update using grub. > > emerge ati-drivers > > It seems this was still present from the previous attempt, so I'll > re-emerge it. > > Running emerge -NDuav system still pulls in mesa, so back in it goes. > Running emerge -NDuav world pulls back in xorg-drivers and pm-utils, so > these are also reinstalled. > > emerge --depclean pulls out a few packages, > radeontool > gst-plugins-v4l > gst-plugins-v4l2 > gentoo-sources-2.6.34-r6 > > since gentoo-sources-2.6.34-r6 is the kernel I'm presently operating > with, I'll re-emerge that and verify that it is still current via > eselect kernel list. > > revdep-rebuild doesn't add anything else. > > Prevent boot-up into X-windows, then reboot. > > rc-update del xdm default > reboot > > run aticonfig --initial to create an xorg.conf file. > > startx > > total system crash - hard reset required to reboot. > > Hmm - the xorg.log file has this error. > atiddxDriScreenInit failed, GPS not been initialized. > > Can anyone shed light on this? > > Thanks > > Jeff
Oops - forgot to eselect opengl set ati Now it's still failing, but a different set of errors, as attached. Any suggestions gratefully received.
X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.34-gentoo-r6 x86_64 Current Operating System: Linux Media-PC 2.6.34-gentoo-r6 #10 SMP Fri Oct 15 21:26:03 EDT 2010 x86_64 Kernel command line: root=/dev/sda3 Build Date: 12 October 2010 08:15:38PM Current version of pixman: 0.18.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 22:41:42 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "aticonfig Layout" (**) |-->Screen "aticonfig-Screen[0]-0" (0) (**) | |-->Monitor "aticonfig-Monitor[0]-0" (**) | |-->Device "aticonfig-Device[0]-0" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/Type1/" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ (==) ModulePath set to "/usr/lib64/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AutoAddDevices. (II) Loader magic: 0x7c3220 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (--) using VT number 7 (--) PCI:*(0:1:0:0) 1002:68be:174b:e148 ATI Technologies Inc rev 0, Mem @ 0xd0000000/268435456, 0xfdfc0000/131072, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded by default. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (WW) Warning, couldn't open module dri (II) UnloadModule: "dri" (EE) Failed to load module "dri" (module does not exist, 0) (II) LoadModule: "dri2" (WW) Warning, couldn't open module dri2 (II) UnloadModule: "dri2" (EE) Failed to load module "dri2" (module does not exist, 0) (II) LoadModule: "fglrx" (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.76.7 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.76.7 (II) ATI Proprietary Linux Driver Version Identifier:8.76.7 (II) ATI Proprietary Linux Driver Release Identifier: 8.762 (II) ATI Proprietary Linux Driver Build Date: Aug 3 2010 21:16:31 (II) Primary Device is: PCI 0...@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Chipset Supported AMD Graphics Processor (0x68BE) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:17:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:18:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:18:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:18:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:19:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:19:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:19:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:3) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:4) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:5) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@1:0:1) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) fglrx(0): pEnt->device->identifier=0x182b440 (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib64/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.7, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "DPMS" "true" (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib64/xorg/modules/linux/libfglrxdrm.so ukiDynamicMajor: failed to open /proc/ati/major ukiDynamicMajor: failed to open /proc/ati/major (==) fglrx(0): NoAccel = NO (==) fglrx(0): ATI 2D Acceleration Architecture enabled (--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series " (Chipset = 0x68be) (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe148) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xfdfc0000 (--) fglrx(0): I/O port at 0x0000ee00 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (EE) fglrx(0): Hasn't established DRM connection (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib64/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 12.20 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: JUNIPER (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (EE) fglrx(0): Hasn't established DRM connection (WW) fglrx(0): Hasn't establisted DRM connection (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000) (WW) fglrx(0): No DRM connection for driver fglrx. (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Connected Display0: DFP on secondary TMDS [tmds2i] (II) fglrx(0): Display0 EDID data --------------------------- (II) fglrx(0): Manufacturer: SNY Model: ea01 Serial#: 16843009 (II) fglrx(0): Year: 2010 Week: 1 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 160 vert.: 90 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): No DPMS capabilities specified (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.635 redY: 0.336 greenX: 0.285 greenY: 0.608 (II) fglrx(0): blueX: 0.146 blueY: 0.061 whiteX: 0.280 whiteY: 0.290 (II) fglrx(0): Supported established timings: (II) fglrx(0): 640x...@60hz (II) fglrx(0): 800x...@60hz (II) fglrx(0): 1024x...@60hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported standard timings: (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 148.5 MHz Image Size: 1600 x 900 mm (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 74.2 MHz Image Size: 1600 x 900 mm (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 (II) fglrx(0): Ranges: V min: 58 V max: 62 Hz, H min: 15 H max: 70 kHz, PixClock max 150 MHz (II) fglrx(0): Monitor name: SONY TV (II) fglrx(0): Number of EDID sections to follow: 1 (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff004dd901ea01010101 (II) fglrx(0): 0114010380a05a780a83ada256499b25 (II) fglrx(0): 0f474a21080081800101010101010101 (II) fglrx(0): 010101010101023a801871382d40582c (II) fglrx(0): 450040846300001e011d007251d01e20 (II) fglrx(0): 6e28550040846300001e000000fd003a (II) fglrx(0): 3e0f460f000a202020202020000000fc (II) fglrx(0): 00534f4e592054560a2020202020015f (II) fglrx(0): End of Display0 EDID data -------------------- (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0 (II) fglrx(0): Output DFP2 has no monitor section (II) fglrx(0): Output DFP3 has no monitor section (II) fglrx(0): Output DFP4 has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output CRT2 has no monitor section (II) fglrx(0): Output DFP1 disconnected (II) fglrx(0): Output DFP2 connected (II) fglrx(0): Output DFP3 disconnected (II) fglrx(0): Output DFP4 disconnected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output CRT2 disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output DFP2 using initial mode 1920x1080 (II) fglrx(0): DPI set to (96, 96) (II) fglrx(0): Eyefinity capable adapter detected. (II) fglrx(0): Adapter ATI Radeon HD 5700 Series has 3 configurable heads and 1 displays connected. (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoDRI = NO (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. (WW) fglrx(0): *********************************************** (WW) fglrx(0): * DRI initialization failed! * (WW) fglrx(0): * (maybe driver kernel module missing or bad) * (WW) fglrx(0): * 2D acceleraton available (MMIO) * (WW) fglrx(0): * no 3D acceleration available * (WW) fglrx(0): *********************************************** (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000 (II) fglrx(0): FBMM initialized for area (0,0)-(1920,8191) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1920 x 6271 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (**) fglrx(0): DPMS enabled (II) fglrx(0): Initialized in-driver Xinerama extension (WW) fglrx(0): Textured Video not supported without DRI enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib64/xorg/modules/glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension GLESX (II) fglrx(0): GLESX enableFlags = 576 (II) fglrx(0): Acceleration enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib64/xorg/modules/amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (EE) fglrx(0): XMM failed to open CMMQS connection. (II) fglrx(0): XMM failed to initialize! (II) fglrx(0): Enable composite support successfully (WW) fglrx(0): Option "VendorName" is not used (WW) fglrx(0): Option "ModelName" is not used (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. Backtrace: 0: /usr/bin/X (xorg_backtrace+0x28) [0x4a1808] 1: /usr/bin/X (0x400000+0x64e89) [0x464e89] 2: /lib/libpthread.so.0 (0x7fc607726000+0xf030) [0x7fc607735030] 3: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (atiddxDisplayViewportCallbackSetMode+0x6d8) [0x7fc604ce0788] 4: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (amd_xserver17_xf86CrtcSetModeTransform+0x212) [0x7fc6050b7cc2] 5: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (amd_xserver17_xf86SetDesiredModes+0x1cb) [0x7fc6050b9e0b] 6: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (amd_xf86SetDesiredModes+0xd) [0x7fc604ce615d] 7: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (atiddxDisplayScrnInit+0xa7) [0x7fc604cdcac7] 8: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (atiddxScreenInit+0x805) [0x7fc604cb8d45] 9: /usr/bin/X (AddScreen+0x196) [0x42aad6] 10: /usr/bin/X (InitOutput+0x79c) [0x47537c] 11: /usr/bin/X (0x400000+0x24f9f) [0x424f9f] 12: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fc6067d0bbd] 13: /usr/bin/X (0x400000+0x24ca9) [0x424ca9] Segmentation fault at address 0x3c Fatal server error: Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.
