on 02/22/2011 01:27 PM Mick wrote the following:
> 2011/2/22 Thanasis <[email protected]>:
>
>> How do we know which firmware file to load for which graphics card?
>> (I have a Sapphire HD 5770 1GB GDDR5)
>>
>
> I suspect it requires the JUNIPER_rlc.bin
>
> Check your dmesg/lspci/lshw for info on the chipset.
>
a section of the output of lswh shows:
*-display
description: VGA compatible controller
product: Juniper [Radeon HD 5700 Series]
vendor: ATI Technologies Inc
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller
bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:43 memory:d0000000-dfffffff
memory:fe8c0000-fe8dffff ioport:b000(size=256) memory:fe8a0000-fe8bffff
*-multimedia
description: Audio device
product: Juniper HDMI Audio [Radeon HD 5700 Series]
vendor: ATI Technologies Inc
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: driver=HDA Intel latency=0
resources: irq:44 memory:fe8fc000-fe8fffff
So it's probably the one you say, but in /lib64/firmware/radeon there are:
JUNIPER_me.bin
JUNIPER_pfp.bin
JUNIPER_rlc.bin
What is the difference between them?
And which package owns them? Because equery shows nothing.
equery b /lib64/firmware/radeon/JUNIPER_*
* Searching for
/lib64/firmware/radeon/JUNIPER_me.bin,/lib64/firmware/radeon/JUNIPER_pfp.bin,/lib64/firmware/radeon/JUNIPER_rlc.bin
...
#
