Blakawk <blakawk <at> gentooist.com> writes:
> I am facing a problem since a week now when enabling radeon power > management following KMS Power Management Options [1]. I have two radeon Well I cannot help you, explicitly; but I have some info to share with you. I have 2 ethernet ports on an older Asus mobo. Until the 3.0 kernel series, the booting process *always* selectrf the eth0 one correctly. Since the 3.0 series, about 20% of boot it selects the second ethernet port as eth0. I can move over the cable, or manually configure or reboot and play roulette. I have not delved into the matter any deeper as I'm swamped with issues..... might a udev rule help establish the correct card to use? Have you tried to first set up (boot) the system without the crossfire confing(wiring)? If that is the sort of phenomenon affecting you, you'd have to ssh into the system and look at the boot files and records. Maybe setting up the system to transmit via a console (serial) port might help to look at the boot output as it occurs and step through the boot sequence. hth, James
