P.S.:
here is the output of "lspci -k"
00:00.0 Host bridge: Intel Corporation ValleyView SSA-CUnit (rev 0c)
Subsystem: Biostar Microtech Int'l Corp Device 1111
00:02.0 VGA compatible controller: Intel Corporation ValleyView Gen7 (rev
0c)
Subsystem: Biostar Microtech Int'l Corp Device 1111
Kernel driver in use: i915
00:13.0 IDE interface: Intel Corporation ValleyView 4-Port SATA Storage
Controller (rev 0c)
Subsystem: Biostar Microtech Int'l Corp Device 521d
Kernel driver in use: ata_piix
00:14.0 USB controller: Intel Corporation ValleyView USB xHCI Host
Controller (rev 0c)
Subsystem: Biostar Microtech Int'l Corp Device 6403
Kernel driver in use: xhci_hcd
00:1a.0 Encryption controller: Intel Corporation ValleyView SEC (rev 0c)
Subsystem: Biostar Microtech Int'l Corp Device 310e
00:1b.0 Audio device: Intel Corporation ValleyView High Definition Audio
Controller (rev 0c)
Subsystem: Biostar Microtech Int'l Corp Device 821e
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev
0c)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev
0c)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev
0c)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev
0c)
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation ValleyView Power Control Unit (rev 0c)
Subsystem: Biostar Microtech Int'l Corp Device 310e
00:1f.3 SMBus: Intel Corporation ValleyView SMBus Controller (rev 0c)
Subsystem: Biostar Microtech Int'l Corp Device 310e
Kernel modules: i2c_i801
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
Subsystem: Device 1c6c:0123
Kernel driver in use: r8169
Thanks again,
Francisco
2014-06-11 8:28 GMT-03:00 Francisco Ares <[email protected]>:
> Hi,
>
> I am trying to install Gentoo on a x64 system with such processor, that,
> as far as I could understand, is like to have the chipset embedded, so the
> buses to video, pci express, usb, etc, comes out of the processor chip.
>
> The kernel from the 3.10 series were not able to correctly handle this
> processor, at least the video driver (not sure about the rest), but the new
> stable one, "gento-sources-3.12.21-r1" is OK, now I have the framebuffer
> splash.
>
> But no X11 for now. I have added "~amd64" keywords to
> "x11-drivers/xf86-video-intel", but, for now, only a black screen, with no
> clue on the log file "/var/log/Xorg.0.log" (which is the latest).
>
> On "/etc/portage/make.conf", I have the line:
>
> VIDEO_CARDS="intel i915 i965 modesetting"
>
> Did I miss something?
>
> Thanks.
> Francisco
>
