<meino.cramer <at> gmx.de> writes:
> > I want to summerize here what works, what dont work and what I tried Meino, I read your email. I have not tried what you are trying before and do not have those boards: maybe I should get a pair? Or are you almost done? What I would suggest is read up on "IP aliasing" and "Network Address Translation". Maybe all you have to do is put the 2 devices on separate USB_busses on your PC. "lsusb" should identify how many differnet usb busses you have on your pc hardware. You motherboard book (online if you don't have one) should also tell you about the different usb busses on your motherboard. Some older PC just have one USB buss. You are going to have to experiment. Check your routing table after you set things up. Also install net-analyzer/macchanger and see if that helps. If you grope long enough, you should find a solution. Hopefully others have some ideas. "netstat" and "arp" are also commands you should look at their options as tools to gain insight into what you are doing, and why what you try, fails. [1] http://en.qi-hardware.com/wiki/Ethernet_over_USB hth, James
