On 27 September 2005 17:59, Mauro Sauco wrote: > On Wed, 28 Sep 2005 00:25:46 +0900, Mauro Sauco wrote > > > On Tue, 27 Sep 2005 17:18:41 +0200, Holly Bostick wrote > > > > > Jason Stubbs schreef: > > > > As I said, it doesn't seem like it's misinterpreting from the output > > > > > > Actually, it seems to me that it is, from the output: > > > > Track 01: 4444 of 4444 MB written (fifo 100%). Track 01: Total bytes > > > > read/written: 4660250624/4660250624 (2275513 sectors). Writing time: > > > > 101.814s Fixating... WARNING: Some drives don't like fixation in > > > > dummy mode. > > > > Sorry, I mistakenly pasted the stdout from one of the times that I > > ran it with -dummy. > > > > I've just tried the suggestion from wong again, but same behavior, > > Just to make sure that the drive wasnt the problem , I replaced it with a > completely different drive and got exactly the same behavior. I have no > clue what could be the problem!
Oh, sorry for my last post. I actually said you replaced. My apologies. > > # cdrecord dev=0,0,0 speed=1 -v -eject -dao -data myimg.iso > > Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J\uffffrg > Schilling TOC Type: 1 = CD-ROM > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 3.5.33 > Using libscg version 'bero-0.5a' > cdrecord: Warning: using inofficial version of libscg (bero-0.5a > '@(#)scsitransp.c 1 .81 01/04/20 Copyright 1988,1995,2000 J. Schilling'). > atapi: 1 > Device type : Removable CD-ROM > Version : 2 > Response Format: 2 > Capabilities : > Vendor_info : 'MATSHITA' > Identifikation : 'DVD-RAM LF-D521 ' > Revision : 'A116' > Device seems to be: Generic mmc2 DVD. > Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). > Driver flags : SWABAUDIO BURNFREE > Supported modes: PACKET SAO > Drive buf size : 1671168 = 1632 KB > FIFO size : 4194304 = 4096 KB > Track 01: data 4444 MB > Total size: 5104 MB (505:40.17) = 2275513 sectors > Lout start: 5104 MB (505:42/13) = 2275513 sectors > Current Secsize: 2048 > ATIP start of lead in: -150 (00:00/00) > Disk type: unknown dye (reserved id code) > Manuf. index: -1 > Manufacturer: unknown (not in table) > Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 22983 > Starting to write CD/DVD at speed 1 in write mode for single session. No, you have not got the same problem. See, it starts in write rather than in dummy mode. > Last chance to quit, starting real write in 0 seconds. Operation starts. > Waiting for reader process to fill input buffer ... input buffer ready. > trackno=0 > BURN-Free is ON. > Performing OPC... > Sending CUE sheet... > cdrecord: WARNING: Drive returns wrong startsec (0) using -150 > Starting new track at sector: 0 > Track 01: 4444 of 4444 MB written (fifo 100%). > Track 01: Total bytes read/written: 4660250624/4660250624 (2275513 This time it wrote all data. > sectors). Writing time: 247.329s > Fixating... > Fixating time: 0.000s > cdrecord: fifo had 73404 puts and 73404 gets. > cdrecord: fifo was 908 times empty and 799 times full, min fill was 0% Your fifo still was empty a hell of a lot of times. Uwe -- 95% of all programmers rate themselves among the top 5% of all software developers. - Linus Torvalds http://www.uwix.iway.na (last updated: 20.06.2004) -- [email protected] mailing list
