On 01/07/2017 07:29 AM, Nikos Chantziaras wrote: > On 01/07/2017 07:49 AM, Daniel Frey wrote: >> So I just recompiled DRM/KMS from the kernel, recompiled, redid the >> initramfs (just in case) and rebooted. >> >> The errors are also gone but I now have this: >> >> [ 31.918334] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver >> for UNIX platforms 375.26 Thu Dec 8 18:04:14 PST 2016 >> [ 31.918704] nvidia-modeset: Allocated GPU:0 >> (GPU-14e248cf-aecd-cf7a-31f4-113e6d075ece) @ PCI:0000:01:00.0 >> >> ...which I didn't have before. > > Yep. The nvidia KMS module conflicts with the in-kernel KMS > implementation. It doesn't get loaded if in-kernel KMS is enabled, and > then you get errors because of that. > > Btw, if you pay attention to the initial emerge messages when emerging > nvidia-drivers, they actually tell you to disable DRM/KMS in the kernel > ;-) The ebuild checks your current kernel config, and if it sees that > stuff enabled, it warns you that you will most probably run into issues. > > >> Now that all that crap is sorted out, the only couple annoying things >> left are alt+tab switching in plasma, and the slowness of dolphin. Task >> switching is slow as f*** and it's irritating. > > I get that too, but only the first time I press alt+tab. After the task > switch effect has been displayed once, it seems it gets cached and then > it's fast. > > But overall, KDE (and KWin in particular) doesn't play well with the > nvidia driver. I was able to fix most of my issues by following some > advice from a KWin developer: > > * Enable triple buffering in xorg. nvidia-drivers requires a conf file > anyway to work correctly. I have it in /etc/X11/xorg.conf.d/nvidia.conf, > and the contents are: > > http://pastebin.com/raw/0y3NMndp > > This enables triple buffering and disables twinview. > > * Set some KWin environment variables. Instead of setting them globally, > use a script named "kwin_x11" in a location that appears before /usr/bin > in PATH. /usr/local/bin does that, so I have a /usr/local/bin/kwin_x11 > file (it must be executable: chmod +x kwin_x11) with this in it: > > KWIN_TRIPLE_BUFFER=1 __GL_YIELD="USLEEP" exec /usr/bin/kwin_x11 $@ > > (/usr/local/bin *must* be before /usr/bin in your PATH variable, > otherwise this doesn't work.) > > * Configure kwin to think it must use a higher refresh rate than your > monitor's refresh rate. For 60Hz, your ~/.config/kwinrc must contain: > > [Compositing] > MaxFPS=70 > RefreshRate=70 > > (There's other stuff in the [Compositing] section, don't delete those.) > > * See if disabling vsync in the nvidia-settings control panel helps. > > After doing all that, KDE is quite usable for me. However, it's far from > perfect. But if you don't want to switch from KDE to some other desktop > environment, and can't deal with the performance issues of the nouveau > driver, then you have not much choice here. > >
Thanks for the tips! Currently I'm taking the lazy way out and doing `emerge -e world`. I don't think that'll fix the alt+tab situation, but maybe it'll fix other stuff. If not I'll try krusader as Philip posted. I ran `emerge -e system` last night and it was finished when I woke up, so now I'll let it chug @world for the day. For me, 1 out of 5 times alt+tab works on the first try. The other 4 out of 5 tries I have to press alt+tab as much as 4 times to get it to respond. :-( I haven't updated my laptop yet and was stunned at how fluid kde4 was, hence my comment about shipping buggy code. Dan