Am Tue, 17 Apr 2018 17:20:21 +0000 schrieb Francisco Ares <[email protected]>:
> Can anyone tell me how to set up the scanner part of an Epson L380? It's most likely done this way (at least for printers which need the open source driver ESC/P-R): - Install sane. - In /etc/sane.d/dll.conf uncomment the line epson2. - In /etc/sane.d/epson2.conf set or uncomment those lines: usb usb <vendor ID> <product ID> net <IP address | autodiscovery> If you have it connected via Wifi you probably need to configure it for USB, too. At least you can configure it for both connection types at the same time. Just in case, you won't be able to use this printer with a Raspberry Pi, because it needs the proprietary ESC/P driver. If you consider connecting an EPSON printer to a Raspberry Pi you would need a printer which needs the open source driver ESC/P-R. Heiko
