2018-04-19 10:36 GMT-03:00 Francisco Ares <fra...@gmail.com>: > > > 2018-04-17 18:29 GMT-03:00 Heiko Baums <li...@baums-on-web.de>: > >> Am Tue, 17 Apr 2018 17:20:21 +0000 >> schrieb Francisco Ares <fra...@gmail.com>: >> >> > Can anyone tell me how to set up the scanner part of an Epson L380? >> >> It's most likely done this way (at least for printers which need the >> open source driver ESC/P-R): >> >> - Install sane. >> - In /etc/sane.d/dll.conf uncomment the line epson2. >> - In /etc/sane.d/epson2.conf set or uncomment those lines: >> >> usb >> usb <vendor ID> <product ID> >> net <IP address | autodiscovery> >> >> If you have it connected via Wifi you probably need to configure it for >> USB, too. At least you can configure it for both connection types at >> the same time. >> >> Just in case, you won't be able to use this printer with a Raspberry Pi, >> because it needs the proprietary ESC/P driver. If you consider >> connecting an EPSON printer to a Raspberry Pi you would need a printer >> which needs the open source driver ESC/P-R. >> >> Heiko >> >> > Regarding the printer part of the Epson L380, the > package net-print/gutenprint does the job, so this part is solved. > > The question remains regarding the scanner part. I'll try your > suggestions, then I get back with the results. > > Thanks! > > Francisco >
It works, thank you! Francisco
