> On 2018-10-26, at 05:27, Andrey Ponomarenko <[email protected]> > wrote: > > Hi, > > The Linux-Hardware.org database has been divided recently into a set of > databases, one per each Linux distro. The one for Gentoo is available at: > > https://linux-hardware.org/?d=Gentoo > > Everyone can contribute to the database with the help of > https://github.com/linuxhw/hw-probe (various packages for the tool are > available: AppImage, Snap, Flatpak, Docker, ebuild > http://gpo.zugaina.org/sys-apps/hw-probe, etc.). The tool is intended to > simplify collecting of logs necessary for investigating hardware related > problems. You need to execute only one simple command to collect all system > logs at once: > > sudo hw-probe -all -upload > > Hardware failures are highlighted in the collected logs (smartctl, dmesg, > xorg.log). Also it's handy to search for particular hardware configurations > in the community and review logs for errors to check operability of devices > on board (for some devices this is done automatically by hw-probe — see > statuses of devices in a probe).
I submitted my machines. What I find unusual is that one of my machines says 'failed' for the video card. On that machine, I have not installed Nvidia-drivers as it is not necessary (not using X or the card for anything except output since the motherboard does not have one built-in). Otherwise not sure how it detects failed vs works vs detected. https://linux-hardware.org/?probe=9cb0ac857a -- Andrew Udvare
