Hey all. I've followed the Gentoo-Wiki HOWTO (which seems to be lacking a lot of extra info), I've played with the lm_sensors website looking for answers, I've been reading countless pages of RTFM, and what not - I'm just slightly frustrated trying to get lm_sensors to work.
http://gentoo-wiki.com/HARDWARE_Sensors http://forums.gentoo.org/viewtopic.php?t=52815 My kernel, with i2c compiled as modules: 2.6.16-gentoo-r3 See here, sysfs is mounted: sysfs on /sys type sysfs (rw) My i2c modules are loading (there may be more needed): i2c_i801 11276 0 i2c_core 22784 3 eeprom,nvidia,i2c_i801 >From /etc/conf.d/rc: RC_DEVICES="udev" lm_sensors installed: [I--] [ ] sys-apps/lm_sensors-2.10.0 (0) It would seem that my setup is ready for lm_sensors, but then when I run sensors after sensors-detect, this is what I get: Can't access procfs/sysfs file Unable to find i2c bus information; For 2.6 kernels, make sure you have mounted sysfs and libsensors was compiled with sysfs support! For older kernels, make sure you have done 'modprobe i2c-proc'! Any idea what I might be missing here? I'm a lm_sensor n00b. Thanks! -- Darth Vader: I find your lack of faith disturbing. -- [email protected] mailing list
