On Fri, 2006-05-05 at 19:26 -0300, Matias Grana wrote:
hi! I'm having serious problems with cdrecord (I actually use k3b, but it calls cdrecord). Every once in a while it used not to finish recording and exiting with errors. I lowered down the speed to 8x (the burner reportedly can do a 52x) and this helped finishing burnings. But now I wasted 2 cds in a row, with 8x speed. The end of the log is below. I really don't know how to handle it. Any help? Yours truly, Matias Log: .... snip ..... Track 01: 187 of 701 MB written (fifo 100%) [buf 99%] 8.0x. Track 01: 188 of 701 MB written (fifo 100%) [buf 99%] 8.2x. /usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 01 79 16 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.052s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 197701632 bytes Writing time: 190.103s Average write speed 25.7x. Min drive buffer fill was 94% Fixating... Fixating time: 1.636s /usr/bin/cdrecord: fifo had 3242 puts and 3115 gets. /usr/bin/cdrecord: fifo was 0 times empty and 2968 times full, min fill was 92%.
