Le 16 septembre à 10:01:38 "Marco Calviani" <[EMAIL PROTECTED]> écrit notamment:
| Hi Jean,
| unfortunately is it still not working even if i've tried changing
| different lines.. (however this does not make very much sense). Can
| you post me you /etc/conf.d/net and /etc/wpa_supplicant.conf files?
>
Sure, here they are; but you will see I'm using wpa, not wep; so you can't
really use my config :-(
/etc/conf.d/net:
....................................
config_eth0=( "194.199.136.151 netmask 255.255.255.0 brd 194.199.136.255" )
routes_eth0=(
"default via 194.199.136.250" # IPv4 default route
)
postup() {
/usr/sbin/netfac
}
#this function is a script I wrote to activate eth1 only if eth0 is not plugged
plug_timeout="10"
modules=( "wpa_supplicant" )
wpa_supplicant_eth1="-Dwext" # For generic wireless
....................................
And here's the /etc/wpa_supplicant.conf:
....................................
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
#I had to emerge relevant packages for these two lines:
pkcs11_engine_path=/usr/lib/engines/engine_pkcs11.so
pkcs11_module_path=/usr/lib/opensc-pkcs11.so
network={
ssid="ribalte"
psk="xxxxxxxxxxxxxxxxx"
priority=5
}
....................................
hth,
--
Jean Magnan de Bornier | Cours Victor Hugo
e-mots: jean at bornier.net | 13980 Alleins France
T 08 70 39 34 03 | P 06 09 17 35 87
--
[email protected] mailing list
