Richard Fish wrote:
On 11/1/06, Rafael Barrera Oro <[EMAIL PROTECTED]> wrote:
pandemonium, i found out that things are way, way slower than before, is
this a known effect of modular X.org?
Not that I'm aware of. Can you post your /var/log/Xorg.0.log
file...maybe there is some clue there.
-Richard
Gladly, could the problem be that i compiled with KDE with the DRI flag
set on make.conf?, anyway here it goes:
Information about my grapchic card: VGA compatible controller: VIA
Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01)
System: Sempron 2800 with 512 Mb of RAM
Kernel (uname -a): Linux gentoo64 2.6.17-gentoo-r5 #1 Wed Aug 16
12:27:04 UTC 2006 x86_64 AMD Sempron(tm) Processor 2800+ AuthenticAMD
GNU/Linux
Xorg.o.log:
(II) VESA(0): Total Memory: 1024 64KB banks (65536kB)
(WW) VESA(0): config file hsync range 31.5-57kHz not within DDC hsync
ranges.
(WW) VESA(0): config file vrefresh range 40-150Hz not within DDC
vrefresh ranges.
(II) VESA(0): My Monitor: Using hsync range of 31.50-57.00 kHz
(II) VESA(0): My Monitor: Using vrefresh range of 40.00-150.00 Hz
(--) VESA(0): Virtual size is 1024x768 (pitch 1024)
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(--) VESA(0): Display dimensions: (280, 210) mm
(--) VESA(0): DPI set to (92, 92)
(WW) (1024x768,My Monitor) mode clock 94.5MHz exceeds DDC maximum 80MHz
(II) VESA(0): Attempting to use 70Hz refresh for mode "1024x768" (118)
(II) VESA(0): Attempting to use 85Hz refresh for mode "800x600" (115)
(II) VESA(0): Attempting to use 85Hz refresh for mode "640x480" (112)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib64/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B]
[5] -1 0 0xfebff800 - 0xfebff8ff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B](B)
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[16] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[17] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[18] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[19] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[20] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[21] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[22] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[23] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[24] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[25] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[26] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[27] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib64/xorg/modules/libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 65536 kB
(II) VESA(0): VESA VBE OEM: VIA K8M800
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor:
(II) VESA(0): VESA VBE OEM Product:
(II) VESA(0): VESA VBE OEM Product Rev:
(==) VESA(0): Write-combining range (0xf8000000,0x4000000)
(II) VESA(0): virtual address = 0x2b9561131000,
physical address = 0xf8000000, size = 67108864
(II) VESA(0): VBESetVBEMode failed...Tried again without customized values.
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "latin"
(**) Keyboard1: XkbLayout: "latin"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc104)+latin" };
xkb_geometry { include "pc(pc104)" };
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/local/, removing from
list!
FreeType: couldn't open face /usr/share/fonts/TTF/luximr.ttf: 1
FreeType: couldn't open face /usr/share/fonts/TTF/luximr.ttf: 1
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+es" };
xkb_geometry { include "pc(pc105)" };
--
[email protected] mailing list
