On Dienstag, 25. September 2007, maxim wexler wrote:
> Hi group,
>
> Just noticed this in dmesg:
>
> <snip>
> hdb: dma_intr: status=0x51 { DriveReady SeekComplete
> Error }
> hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
> hdb: dma_intr: status=0x51 { DriveReady SeekComplete
> Error }
> hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
> hdb: dma_intr: status=0x51 { DriveReady SeekComplete
> Error }
> hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
> hdb: dma_intr: status=0x51 { DriveReady SeekComplete
> Error }
> hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
> hda: DMA disabled
> ide0: reset: success
> <snip>
>
> So far I've changed the cable and turned on
> IDEDISK_MULTI_MODE in the kernel.
>
> No other problems w/ the drive.
>
> Drive is Maxtor 120G IDE. Very low hours on it.so it is still covered by warranty? Replace it! > > Can I just let this slide? no, replace it. -- [EMAIL PROTECTED] mailing list
