http://www.sciencedirect.com/science/article/pii/S1750583615001565
Time-lapse pressure tomography for characterizing CO2 plume evolution in a deep saline aquifer Linwei Hu Peter Bayer Ralf Brauchler Highlights • A series of interference fluid injection tests is modeled. • Flow properties of CO2-brine mixture are evaluated by a single-phase proxy. • CO2 plume propagation is delineated by applying pressure tomography in a time-lapse strategy. • Saturation of inverted plume is estimated by calibrated value of specific storage. Abstract A time-lapse pressure tomography inversion approach is applied to characterize the CO2 plume development in a virtual deep saline aquifer. Deep CO2 injection leads to flow properties of the mixed-phase, which vary depending on the CO2 saturation. Analogous to the crossed ray paths of a seismic tomographic experiment, pressure tomography creates streamline patterns by injecting brine prior to CO2 injection or by injecting small amounts of CO2 into the two-phase (brine and CO2) system at different depths. In a first step, the introduced pressure responses at observation locations are utilized for a computationally rapid and efficient eikonal equation based inversion to reconstruct the heterogeneity of the subsurface with diffusivity (D) tomograms. Information about the plume shape can be derived by comparing D-tomograms of the aquifer at different times. In a second step, the aquifer is subdivided into two zones of constant values of hydraulic conductivity (K) and specific storage (Ss) through a clustering approach. For the CO2 plume, mixed-phase K and Ss values are estimated by minimizing the difference between calculated and “true” pressure responses using a single-phase flow simulator to reduce the computing complexity. Finally, the estimated flow property is converted to gas saturation by a single-phase proxy, which represents an integrated value of the plume. This novel approach is tested first with a doublet well configuration, and it reveals a great potential of pressure tomography based concepts for characterizing and monitoring deep aquifers, as well as the evolution of a CO2 plume. Still, field-testing will be required for better assessing the applicability of this approach. Keywords Two-phase flow in porous mediaMixed-phase flowDeep saline aquiferPressure tomographyCO2 plume monitoring -- You received this message because you are subscribed to the Google Groups "geoengineering" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/geoengineering. For more options, visit https://groups.google.com/d/optout.
